diff --git a/src/components/floor-plan/modal/circuitTrestle/CircuitTrestleSetting.jsx b/src/components/floor-plan/modal/circuitTrestle/CircuitTrestleSetting.jsx
index 109da999..7301f0d7 100644
--- a/src/components/floor-plan/modal/circuitTrestle/CircuitTrestleSetting.jsx
+++ b/src/components/floor-plan/modal/circuitTrestle/CircuitTrestleSetting.jsx
@@ -356,7 +356,7 @@ export default function CircuitTrestleSetting({ id }) {
   }
 
   // 회로할당(승압설정) 저장 버튼 클릭 시
-  const onApply = () => {
+  const onApply = async () => {
     canvas
       .getObjects()
       .filter((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE)
@@ -364,8 +364,7 @@ export default function CircuitTrestleSetting({ id }) {
         obj.pcses = getStepUpListData()
       })
 
-    console.log(canvas.getObjects().filter((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE))
-    apply()
+    const result = await apply()
   }
 
   const onClickPrev = () => {
diff --git a/src/components/floor-plan/modal/circuitTrestle/step/StepUp.jsx b/src/components/floor-plan/modal/circuitTrestle/step/StepUp.jsx
index 9f558f16..7d2da472 100644
--- a/src/components/floor-plan/modal/circuitTrestle/step/StepUp.jsx
+++ b/src/components/floor-plan/modal/circuitTrestle/step/StepUp.jsx
@@ -248,6 +248,7 @@ export default function StepUp(props) {
           circuitInfo: module.pcsItemId,
         })
         targetModule.circuit = moduleCircuitText
+        targetModule.pcsItemId = module.pcsItemId
         targetModule.circuitNumber = module.circuit
         canvas.add(moduleCircuitText)
       })
diff --git a/src/components/floor-plan/modal/circuitTrestle/step/type/PassivityCircuitAllocation.jsx b/src/components/floor-plan/modal/circuitTrestle/step/type/PassivityCircuitAllocation.jsx
index 77404733..ded6c61f 100644
--- a/src/components/floor-plan/modal/circuitTrestle/step/type/PassivityCircuitAllocation.jsx
+++ b/src/components/floor-plan/modal/circuitTrestle/step/type/PassivityCircuitAllocation.jsx
@@ -249,8 +249,8 @@ export default function PassivityCircuitAllocation(props) {
           }),
         }
       })
-
-    const pcsItemList = selectedModels.map((model) => {
+    console.log('uniqueCircuitNumbers', uniqueCircuitNumbers)
+    const pcsItemList = selectedModels.map((model, index) => {
       return {
         pcsMkrCd: model.pcsMkrCd,
         pcsSerCd: model.pcsSerCd,
@@ -260,7 +260,7 @@ export default function PassivityCircuitAllocation(props) {
         serQtyList: [
           {
             serQty: targetModules.length,
-            paralQty: 0,
+            paralQty: uniqueCircuitNumbers.length,
             rmdYn: 'Y',
             usePossYn: 'Y',
             roofSurfaceList: roofSurfaceList,
diff --git a/src/hooks/module/useTrestle.js b/src/hooks/module/useTrestle.js
index eb7ecbc2..98113f08 100644
--- a/src/hooks/module/useTrestle.js
+++ b/src/hooks/module/useTrestle.js
@@ -1,5 +1,5 @@
 import { useRecoilState, useRecoilValue } from 'recoil'
-import { canvasState } from '@/store/canvasAtom'
+import { canvasState, currentAngleTypeSelector } from '@/store/canvasAtom'
 import { POLYGON_TYPE } from '@/common/common'
 import { moduleSelectionDataState } from '@/store/selectedModuleOptions'
 import { getDegreeByChon, getTrestleLength } from '@/util/canvas-util'
@@ -13,220 +13,207 @@ export const useTrestle = () => {
   const moduleSelectionData = useRecoilValue(moduleSelectionDataState) //다음으로 넘어가는 최종 데이터
   const { getQuotationItem } = useMasterController()
   const [estimateParam, setEstimateParam] = useRecoilState(estimateParamAtom)
+  const currentAngleType = useRecoilValue(currentAngleTypeSelector)
 
   const apply = () => {
-    //처마력바가 체크되어 있는 경우 exposedBottomPoints를 이용해 처마력바 그려줘야함.
-    // exposedBottomPoints는 노출 최하면 들의 centerPoint 배열.
+    try {
+      //처마력바가 체크되어 있는 경우 exposedBottomPoints를 이용해 처마력바 그려줘야함.
+      // exposedBottomPoints는 노출 최하면 들의 centerPoint 배열.
 
-    const surfaces = canvas.getObjects().filter((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE)
-    // 기존 eaveBar를 삭제
-    canvas.getObjects().forEach((obj) => {
-      if (obj.name === 'eaveBar' || obj.name === 'rack' || obj.name === 'halfEaveBar' || obj.name === 'smartRack') {
-        canvas.remove(obj)
-      }
-    })
-    canvas.getObjects().forEach((obj) => {
-      if (obj.name === 'bracket') {
-        canvas.remove(obj)
-      }
-    })
-    surfaces.forEach((surface) => {
-      const parent = canvas.getObjects().find((obj) => obj.id === surface.parentId)
-      const roofMaterialIndex = parent.roofMaterial.index
-      const construction = moduleSelectionData?.roofConstructions?.find((construction) => construction.roofIndex === roofMaterialIndex).construction
-      if (!construction) {
-        alert('앞에서 셋팅 안됨')
-        return
-      }
-
-      let moduleRowsTotCnt = 0
-      let isEaveBar = construction.setupCover
-      let isSnowGuard = construction.setupSnowCover
-      const direction = parent.direction
-      const rack = surface.trestleDetail.rack
-      let { rackQty, rackIntvlPct, rackYn, cvrPlvrYn } = surface.trestleDetail
-
-      if (!rack) {
-        //25/01/16 기준 랙이 없는 경우는 그냥 안그려준다.
-        return
-      }
-
-      const rackInfos = Object.keys(rack).map((key) => {
-        return { key, value: rack[key] }
-      })
-
-      const result = calculateForApi(surface)
-
-      if (!result) {
-        return
-      }
-      const centerPoints = result.centerPoints
-
-      const exposedBottomModules = [] // 아래 두면이 모두 노출 되어있는 경우
-      const leftExposedHalfBottomModules = [] // 왼쪽 면만 노출되어있는 경우
-      const rightExposedHalfBottomPoints = [] // 오른쪽 면만 노출되어 있는 경우
-      const leftExposedHalfTopModules = [] // 왼쪽 면만 노출되어 있는 경우
-      const rightExposedHalfTopPoints = [] // 오른쪽 면만 노출되어 있는 경우
-      const modules = canvas.getObjects().filter((obj) => obj.name === POLYGON_TYPE.MODULE)
-
-      modules.forEach((module) => {
-        const { x, y } = module.getCenterPoint()
-        const isExposedBottom = result.exposedBottomPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
-        const isLeftExposedHalfBottom = result.leftExposedHalfBottomPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
-        const isRightExposedHalfBottom = result.rightExposedHalfBottomPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
-        const isRightExposedHalfTop = result.rightExposedHalfTopPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
-        const isLeftExposedHalfTop = result.leftExposedHalfTopPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
-        if (isExposedBottom) {
-          exposedBottomModules.push(module)
-        }
-        if (isLeftExposedHalfBottom) {
-          leftExposedHalfBottomModules.push(module)
-        }
-        if (isRightExposedHalfBottom) {
-          rightExposedHalfBottomPoints.push(module)
-        }
-        if (isRightExposedHalfTop) {
-          leftExposedHalfTopModules.push(module)
-        }
-        if (isLeftExposedHalfTop) {
-          rightExposedHalfTopPoints.push(module)
-        }
-      })
-
-      // 4개중 한개라도 있는 경우 치조배치로 간주한다.
-      const isChidory =
-        leftExposedHalfBottomModules.length > 0 ||
-        rightExposedHalfBottomPoints.length > 0 ||
-        leftExposedHalfTopModules.length > 0 ||
-        rightExposedHalfTopPoints.length > 0
-
-      surface.set({ isChidory: isChidory })
-
-      canvas
-        .getObjects()
-        .filter((obj) => ['eaveBar', 'halfEaveBar'].includes(obj.name) && obj.parentId === surface.id)
-        .forEach((obj) => {
+      const surfaces = canvas.getObjects().filter((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE)
+      // 기존 eaveBar를 삭제
+      canvas.getObjects().forEach((obj) => {
+        if (obj.name === 'eaveBar' || obj.name === 'rack' || obj.name === 'halfEaveBar' || obj.name === 'smartRack') {
           canvas.remove(obj)
+        }
+      })
+      canvas.getObjects().forEach((obj) => {
+        if (obj.name === 'bracket') {
+          canvas.remove(obj)
+        }
+      })
+      surfaces.forEach((surface) => {
+        const parent = canvas.getObjects().find((obj) => obj.id === surface.parentId)
+        const roofMaterialIndex = parent.roofMaterial.index
+        const construction = moduleSelectionData?.roofConstructions?.find((construction) => construction.roofIndex === roofMaterialIndex).construction
+        if (!construction) {
+          alert('앞에서 셋팅 안됨')
+          return
+        }
+
+        let moduleRowsTotCnt = 0
+        let isEaveBar = construction.setupCover
+        let isSnowGuard = construction.setupSnowCover
+        const direction = parent.direction
+        const rack = surface.trestleDetail.rack
+        let { rackQty, rackIntvlPct, rackYn, cvrPlvrYn } = surface.trestleDetail
+
+        if (!rack) {
+          //25/01/16 기준 랙이 없는 경우는 그냥 안그려준다.
+          return
+        }
+
+        const rackInfos = Object.keys(rack).map((key) => {
+          return { key, value: rack[key] }
         })
 
-      if (isEaveBar) {
-        // 처마력바설치 true인 경우 설치
-        exposedBottomModules.forEach((module) => {
-          //TODO : 방향별로 처마력바 설치해야함
-          const bottomPoints = findTopTwoPoints([...module.points], direction)
-          if (!bottomPoints) return
-          const eaveBar = new fabric.Line([bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y], {
-            parent: surface,
-            name: 'eaveBar',
-            stroke: 'blue',
-            strokeWidth: 4,
-            selectable: false,
-            surfaceId: surface.id,
-            parentId: module.id,
+        const result = calculateForApi(surface)
+
+        if (!result) {
+          return
+        }
+        const centerPoints = result.centerPoints
+
+        const exposedBottomModules = [] // 아래 두면이 모두 노출 되어있는 경우
+        const leftExposedHalfBottomModules = [] // 왼쪽 면만 노출되어있는 경우
+        const rightExposedHalfBottomPoints = [] // 오른쪽 면만 노출되어 있는 경우
+        const leftExposedHalfTopModules = [] // 왼쪽 면만 노출되어 있는 경우
+        const rightExposedHalfTopPoints = [] // 오른쪽 면만 노출되어 있는 경우
+        const modules = canvas.getObjects().filter((obj) => obj.name === POLYGON_TYPE.MODULE)
+
+        modules.forEach((module) => {
+          const { x, y } = module.getCenterPoint()
+          const isExposedBottom = result.exposedBottomPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
+          const isLeftExposedHalfBottom = result.leftExposedHalfBottomPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
+          const isRightExposedHalfBottom = result.rightExposedHalfBottomPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
+          const isRightExposedHalfTop = result.rightExposedHalfTopPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
+          const isLeftExposedHalfTop = result.leftExposedHalfTopPoints.some((point) => Math.abs(point.x - x) < 2 && Math.abs(point.y - y) < 2)
+          if (isExposedBottom) {
+            exposedBottomModules.push(module)
+          }
+          if (isLeftExposedHalfBottom) {
+            leftExposedHalfBottomModules.push(module)
+          }
+          if (isRightExposedHalfBottom) {
+            rightExposedHalfBottomPoints.push(module)
+          }
+          if (isRightExposedHalfTop) {
+            leftExposedHalfTopModules.push(module)
+          }
+          if (isLeftExposedHalfTop) {
+            rightExposedHalfTopPoints.push(module)
+          }
+        })
+
+        // 4개중 한개라도 있는 경우 치조배치로 간주한다.
+        const isChidory =
+          leftExposedHalfBottomModules.length > 0 ||
+          rightExposedHalfBottomPoints.length > 0 ||
+          leftExposedHalfTopModules.length > 0 ||
+          rightExposedHalfTopPoints.length > 0
+
+        surface.set({ isChidory: isChidory })
+
+        canvas
+          .getObjects()
+          .filter((obj) => ['eaveBar', 'halfEaveBar'].includes(obj.name) && obj.parentId === surface.id)
+          .forEach((obj) => {
+            canvas.remove(obj)
           })
-          canvas.add(eaveBar)
-          canvas.renderAll()
-        })
 
-        if (isChidory && cvrPlvrYn === 'Y') {
-          leftExposedHalfBottomModules.forEach((module) => {
+        if (isEaveBar) {
+          // 처마력바설치 true인 경우 설치
+          exposedBottomModules.forEach((module) => {
+            //TODO : 방향별로 처마력바 설치해야함
             const bottomPoints = findTopTwoPoints([...module.points], direction)
-            let barPoints = []
-            //설치해야할 반처마커버 포인트를 방향에 따라 설정
-
-            if (direction === 'south') {
-              barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x - module.width / 2, bottomPoints[1].y]
-            } else if (direction === 'north') {
-              barPoints = [bottomPoints[0].x + module.width / 2, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y]
-            } else if (direction === 'east') {
-              barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[0].y - module.height / 2]
-            } else if (direction === 'west') {
-              barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y - module.height / 2]
-            }
-
             if (!bottomPoints) return
-            const halfEaveBar = new fabric.Line(barPoints, {
+            const eaveBar = new fabric.Line([bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y], {
               parent: surface,
-              name: 'halfEaveBar',
+              name: 'eaveBar',
               stroke: 'blue',
               strokeWidth: 4,
               selectable: false,
               surfaceId: surface.id,
               parentId: module.id,
             })
-            canvas.add(halfEaveBar)
+            canvas.add(eaveBar)
             canvas.renderAll()
           })
 
-          rightExposedHalfBottomPoints.forEach((module) => {
-            const bottomPoints = findTopTwoPoints([...module.points], direction)
-            let barPoints = []
-            //설치해야할 반처마커버 포인트를 방향에 따라 설정
+          if (isChidory && cvrPlvrYn === 'Y') {
+            leftExposedHalfBottomModules.forEach((module) => {
+              const bottomPoints = findTopTwoPoints([...module.points], direction)
+              let barPoints = []
+              //설치해야할 반처마커버 포인트를 방향에 따라 설정
 
-            if (direction === 'south') {
-              barPoints = [bottomPoints[0].x + module.width / 2, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y]
-            } else if (direction === 'north') {
-              barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[0].x + module.width / 2, bottomPoints[1].y]
-            } else if (direction === 'east') {
-              barPoints = [bottomPoints[0].x, bottomPoints[1].y + module.height / 2, bottomPoints[1].x, bottomPoints[1].y]
-            } else if (direction === 'west') {
-              barPoints = [bottomPoints[0].x, bottomPoints[1].y - module.height / 2, bottomPoints[1].x, bottomPoints[1].y]
-            }
+              if (direction === 'south') {
+                barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x - module.width / 2, bottomPoints[1].y]
+              } else if (direction === 'north') {
+                barPoints = [bottomPoints[0].x + module.width / 2, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y]
+              } else if (direction === 'east') {
+                barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[0].y - module.height / 2]
+              } else if (direction === 'west') {
+                barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y - module.height / 2]
+              }
 
-            if (!bottomPoints) return
-            const halfEaveBar = new fabric.Line(barPoints, {
-              parent: surface,
-              name: 'halfEaveBar',
-              stroke: 'blue',
-              strokeWidth: 4,
-              selectable: false,
-              parentId: module.id,
+              if (!bottomPoints) return
+              const halfEaveBar = new fabric.Line(barPoints, {
+                parent: surface,
+                name: 'halfEaveBar',
+                stroke: 'blue',
+                strokeWidth: 4,
+                selectable: false,
+                surfaceId: surface.id,
+                parentId: module.id,
+              })
+              canvas.add(halfEaveBar)
+              canvas.renderAll()
             })
-            canvas.add(halfEaveBar)
-            canvas.renderAll()
-          })
+
+            rightExposedHalfBottomPoints.forEach((module) => {
+              const bottomPoints = findTopTwoPoints([...module.points], direction)
+              let barPoints = []
+              //설치해야할 반처마커버 포인트를 방향에 따라 설정
+
+              if (direction === 'south') {
+                barPoints = [bottomPoints[0].x + module.width / 2, bottomPoints[0].y, bottomPoints[1].x, bottomPoints[1].y]
+              } else if (direction === 'north') {
+                barPoints = [bottomPoints[0].x, bottomPoints[0].y, bottomPoints[0].x + module.width / 2, bottomPoints[1].y]
+              } else if (direction === 'east') {
+                barPoints = [bottomPoints[0].x, bottomPoints[1].y + module.height / 2, bottomPoints[1].x, bottomPoints[1].y]
+              } else if (direction === 'west') {
+                barPoints = [bottomPoints[0].x, bottomPoints[1].y - module.height / 2, bottomPoints[1].x, bottomPoints[1].y]
+              }
+
+              if (!bottomPoints) return
+              const halfEaveBar = new fabric.Line(barPoints, {
+                parent: surface,
+                name: 'halfEaveBar',
+                stroke: 'blue',
+                strokeWidth: 4,
+                selectable: false,
+                parentId: module.id,
+              })
+              canvas.add(halfEaveBar)
+              canvas.renderAll()
+            })
+          }
         }
-      }
-      const horizontal = ['south', 'north'].includes(direction) ? surface.trestleDetail.moduleIntvlHor : surface.trestleDetail.moduleIntvlVer
+        const horizontal = ['south', 'north'].includes(direction) ? surface.trestleDetail.moduleIntvlHor : surface.trestleDetail.moduleIntvlVer
 
-      const vertical = ['south', 'north'].includes(direction) ? surface.trestleDetail.moduleIntvlVer : surface.trestleDetail.moduleIntvlHor
+        const vertical = ['south', 'north'].includes(direction) ? surface.trestleDetail.moduleIntvlVer : surface.trestleDetail.moduleIntvlHor
 
-      let mostRowsModule = 0 // 모듈 최대 단 수
-      // 가대 설치를 위한 가장 아래 모듈로부터 위로 몇단인지 계산
-      // 오른쪽,왼쪽 둘 다 아래에 아무것도 없는, 처마 커버를 필요로 하는 모듈
-      exposedBottomModules.forEach((module) => {
-        let { width, height } = { ...module }
-        width = Math.floor(width)
-        height = Math.floor(height)
-        let { x: startX, y: startY } = { ...module.getCenterPoint() }
-        let { x, y } = { ...module.getCenterPoint() }
+        let mostRowsModule = 0 // 모듈 최대 단 수
+        // 가대 설치를 위한 가장 아래 모듈로부터 위로 몇단인지 계산
+        // 오른쪽,왼쪽 둘 다 아래에 아무것도 없는, 처마 커버를 필요로 하는 모듈
+        exposedBottomModules.forEach((module) => {
+          let { width, height } = { ...module }
+          width = Math.floor(width)
+          height = Math.floor(height)
+          let { x: startX, y: startY } = { ...module.getCenterPoint() }
+          let { x, y } = { ...module.getCenterPoint() }
 
-        let leftRows = 1
-        let rightRows = 1
-        let centerRows = 1
-        let hasNextModule = true
-        let findLeft = true
-        let findRight = true
+          let leftRows = 1
+          let rightRows = 1
+          let centerRows = 1
+          let hasNextModule = true
+          let findLeft = true
+          let findRight = true
 
-        //우선 절반을 나눈 뒤 왼쪽부터 찾는다.
-        while (hasNextModule) {
-          //바로 위에 있는지 확인한다.
-          let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-
-          if (nextModule) {
-            // 바로 위 모듈을 찾는다.
-            leftRows++
-            x = nextModule.x
-            y = nextModule.y
-          } else {
-            // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
-            if (findLeft) {
-              nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findLeft = false
-            } else {
-              nextModule = findNextRightModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findLeft = true
-            }
+          //우선 절반을 나눈 뒤 왼쪽부터 찾는다.
+          while (hasNextModule) {
+            //바로 위에 있는지 확인한다.
+            let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
 
             if (nextModule) {
               // 바로 위 모듈을 찾는다.
@@ -234,126 +221,126 @@ export const useTrestle = () => {
               x = nextModule.x
               y = nextModule.y
             } else {
-              hasNextModule = false
+              // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
+              if (findLeft) {
+                nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+                findLeft = false
+              } else {
+                nextModule = findNextRightModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+                findLeft = true
+              }
+
+              if (nextModule) {
+                // 바로 위 모듈을 찾는다.
+                leftRows++
+                x = nextModule.x
+                y = nextModule.y
+              } else {
+                hasNextModule = false
+              }
             }
           }
-        }
 
-        hasNextModule = true
-        x = startX
-        y = startY
+          hasNextModule = true
+          x = startX
+          y = startY
 
-        // 오른쪽 찾는다.
-        while (hasNextModule) {
-          //바로 위에 있는지 확인한다.
-          let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-
-          if (nextModule) {
-            // 바로 위 모듈을 찾는다.
-            rightRows++
-            x = nextModule.x
-            y = nextModule.y
-          } else {
-            // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
-            if (findRight) {
-              nextModule = findNextRightModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findRight = false
-            } else {
-              nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findRight = true
-            }
+          // 오른쪽 찾는다.
+          while (hasNextModule) {
+            //바로 위에 있는지 확인한다.
+            let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
 
             if (nextModule) {
               // 바로 위 모듈을 찾는다.
               rightRows++
               x = nextModule.x
               y = nextModule.y
+            } else {
+              // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
+              if (findRight) {
+                nextModule = findNextRightModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+                findRight = false
+              } else {
+                nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+                findRight = true
+              }
+
+              if (nextModule) {
+                // 바로 위 모듈을 찾는다.
+                rightRows++
+                x = nextModule.x
+                y = nextModule.y
+              } else {
+                hasNextModule = false
+              }
+            }
+          }
+
+          hasNextModule = true
+          x = startX
+          y = startY
+
+          // 센터 찾는다.
+          while (hasNextModule) {
+            //바로 위에 있는지 확인한다.
+            let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+
+            if (nextModule) {
+              // 바로 위 모듈을 찾는다.
+              centerRows++
+              x = nextModule.x
+              y = nextModule.y
             } else {
               hasNextModule = false
             }
           }
-        }
 
-        hasNextModule = true
-        x = startX
-        y = startY
+          // 모듈의 왼쪽 부터 그릴 랙 정보를 가져온다.
+          const leftRacks = rackInfos.find((rack) => {
+            return rack.value.moduleRows === leftRows
+          })?.value.racks
 
-        // 센터 찾는다.
-        while (hasNextModule) {
-          //바로 위에 있는지 확인한다.
-          let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+          // 모듈의 오른쪽 부터 그릴 랙 정보를 가져온다.
+          const rightRacks = rackInfos.find((rack) => {
+            return rack.value.moduleRows === rightRows
+          })?.value.racks
+          // 해당 rack으로 그려준다.
 
-          if (nextModule) {
-            // 바로 위 모듈을 찾는다.
-            centerRows++
-            x = nextModule.x
-            y = nextModule.y
-          } else {
-            hasNextModule = false
-          }
-        }
+          const centerRacks = rackInfos.find((rack) => {
+            return rack.value.moduleRows === centerRows
+          })?.value.racks
 
-        // 모듈의 왼쪽 부터 그릴 랙 정보를 가져온다.
-        const leftRacks = rackInfos.find((rack) => {
-          return rack.value.moduleRows === leftRows
-        })?.value.racks
+          mostRowsModule = Math.max(leftRows, rightRows, centerRows, mostRowsModule)
 
-        // 모듈의 오른쪽 부터 그릴 랙 정보를 가져온다.
-        const rightRacks = rackInfos.find((rack) => {
-          return rack.value.moduleRows === rightRows
-        })?.value.racks
-        // 해당 rack으로 그려준다.
+          if (rackYn === 'Y') {
+            drawRacks(leftRacks, rackQty, rackIntvlPct, module, direction, 'L', rackYn)
+            drawRacks(rightRacks, rackQty, rackIntvlPct, module, direction, 'R', rackYn)
 
-        const centerRacks = rackInfos.find((rack) => {
-          return rack.value.moduleRows === centerRows
-        })?.value.racks
-
-        mostRowsModule = Math.max(leftRows, rightRows, centerRows, mostRowsModule)
-
-        if (rackYn === 'Y') {
-          drawRacks(leftRacks, rackQty, rackIntvlPct, module, direction, 'L', rackYn)
-          drawRacks(rightRacks, rackQty, rackIntvlPct, module, direction, 'R', rackYn)
-
-          if (rackQty === 3) {
-            //rack 갯수가 3개인 경우는 중간렉도 추가해줘야함
-            drawRacks(centerRacks, rackQty, rackIntvlPct, module, direction, 'C', rackYn)
-          } else if (rackQty === 4) {
-            drawRacks(leftRacks, rackQty, rackIntvlPct / 3, module, direction, 'L', rackYn)
-            drawRacks(rightRacks, rackQty, rackIntvlPct / 3, module, direction, 'R', rackYn)
-          }
-        }
-        module.set({ leftRows, rightRows, centerRows })
-      })
-      // 왼쪽아래에 모듈이 없는 모듈들
-      leftExposedHalfBottomModules.forEach((module) => {
-        const { width, height } = module
-        let { x: startX, y: startY } = { ...module.getCenterPoint() }
-        let { x, y } = { ...module.getCenterPoint() }
-        //TODO : 방향별로 가대 설치해야함
-
-        let leftRows = 1
-        let hasNextModule = true
-        let findLeft = true
-
-        //우선 절반을 나눈 뒤 왼쪽부터 찾는다.
-        while (hasNextModule) {
-          //바로 위에 있는지 확인한다.
-          let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-
-          if (nextModule) {
-            // 바로 위 모듈을 찾는다.
-            leftRows++
-            x = nextModule.x
-            y = nextModule.y
-          } else {
-            // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
-            if (findLeft) {
-              nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findLeft = false
-            } else {
-              nextModule = nextModule = findNextRightModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findLeft = true
+            if (rackQty === 3) {
+              //rack 갯수가 3개인 경우는 중간렉도 추가해줘야함
+              drawRacks(centerRacks, rackQty, rackIntvlPct, module, direction, 'C', rackYn)
+            } else if (rackQty === 4) {
+              drawRacks(leftRacks, rackQty, rackIntvlPct / 3, module, direction, 'L', rackYn)
+              drawRacks(rightRacks, rackQty, rackIntvlPct / 3, module, direction, 'R', rackYn)
             }
+          }
+          module.set({ leftRows, rightRows, centerRows })
+        })
+        // 왼쪽아래에 모듈이 없는 모듈들
+        leftExposedHalfBottomModules.forEach((module) => {
+          const { width, height } = module
+          let { x: startX, y: startY } = { ...module.getCenterPoint() }
+          let { x, y } = { ...module.getCenterPoint() }
+          //TODO : 방향별로 가대 설치해야함
+
+          let leftRows = 1
+          let hasNextModule = true
+          let findLeft = true
+
+          //우선 절반을 나눈 뒤 왼쪽부터 찾는다.
+          while (hasNextModule) {
+            //바로 위에 있는지 확인한다.
+            let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
 
             if (nextModule) {
               // 바로 위 모듈을 찾는다.
@@ -361,52 +348,63 @@ export const useTrestle = () => {
               x = nextModule.x
               y = nextModule.y
             } else {
-              hasNextModule = false
+              // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
+              if (findLeft) {
+                nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+                findLeft = false
+              } else {
+                nextModule = nextModule = findNextRightModule(
+                  {
+                    x,
+                    y,
+                    width,
+                    height,
+                    horizontal,
+                    vertical,
+                  },
+                  centerPoints,
+                  direction,
+                )
+                findLeft = true
+              }
+
+              if (nextModule) {
+                // 바로 위 모듈을 찾는다.
+                leftRows++
+                x = nextModule.x
+                y = nextModule.y
+              } else {
+                hasNextModule = false
+              }
             }
           }
-        }
 
-        // 모듈의 왼쪽 부터 그릴 랙 정보를 가져온다.
-        const leftRacks = rackInfos.find((rack) => {
-          return rack.value.moduleRows === leftRows
-        })?.value.racks
-        mostRowsModule = Math.max(leftRows, mostRowsModule)
-        if (rackYn === 'Y') {
-          drawRacks(leftRacks, rackQty, rackIntvlPct, module, direction, 'L', rackYn)
-        }
+          // 모듈의 왼쪽 부터 그릴 랙 정보를 가져온다.
+          const leftRacks = rackInfos.find((rack) => {
+            return rack.value.moduleRows === leftRows
+          })?.value.racks
+          mostRowsModule = Math.max(leftRows, mostRowsModule)
+          if (rackYn === 'Y') {
+            drawRacks(leftRacks, rackQty, rackIntvlPct, module, direction, 'L', rackYn)
+          }
 
-        module.set({ leftRows })
-      })
-      // 오른쪽 아래에 모듈이 없는 모듈들
-      rightExposedHalfBottomPoints.forEach((module) => {
-        const { width, height } = module
-        let { x: startX, y: startY } = { ...module.getCenterPoint() }
-        let { x, y } = { ...module.getCenterPoint() }
-        //TODO : 방향별로 가대 설치해야함
+          module.set({ leftRows })
+        })
+        // 오른쪽 아래에 모듈이 없는 모듈들
+        rightExposedHalfBottomPoints.forEach((module) => {
+          const { width, height } = module
+          let { x: startX, y: startY } = { ...module.getCenterPoint() }
+          let { x, y } = { ...module.getCenterPoint() }
+          //TODO : 방향별로 가대 설치해야함
 
-        let rightRows = 1
-        let hasNextModule = true
-        let findRight = true
+          let rightRows = 1
+          let hasNextModule = true
+          let findRight = true
 
-        // 오른쪽 찾는다.
-        while (hasNextModule) {
-          //바로 위에 있는지 확인한다.
-          let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-
-          if (nextModule) {
-            // 바로 위 모듈을 찾는다.
-            rightRows++
-            x = nextModule.x
-            y = nextModule.y
-          } else {
-            // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
-            if (findRight) {
-              nextModule = findNextRightModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findRight = false
-            } else {
-              nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
-              findRight = true
-            }
+          // 오른쪽 찾는다.
+          while (hasNextModule) {
+            //바로 위에 있는지 확인한다.
+            let nextModule = findNextModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
 
             if (nextModule) {
               // 바로 위 모듈을 찾는다.
@@ -414,43 +412,62 @@ export const useTrestle = () => {
               x = nextModule.x
               y = nextModule.y
             } else {
-              hasNextModule = false
+              // 바로 위가 없을 경우 먼저 왼쪽위가 있는지 확인 한다.
+              if (findRight) {
+                nextModule = findNextRightModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+                findRight = false
+              } else {
+                nextModule = findNextLeftModule({ x, y, width, height, horizontal, vertical }, centerPoints, direction)
+                findRight = true
+              }
+
+              if (nextModule) {
+                // 바로 위 모듈을 찾는다.
+                rightRows++
+                x = nextModule.x
+                y = nextModule.y
+              } else {
+                hasNextModule = false
+              }
             }
           }
+
+          // 모듈의 오른쪽 부터 그릴 랙 정보를 가져온다.
+          const rightRacks = rackInfos.find((rack) => {
+            return rack.value.moduleRows === rightRows
+          })?.value.racks
+
+          mostRowsModule = Math.max(rightRows, mostRowsModule)
+          // 해당 rack으로 그려준다.
+          if (rackYn === 'Y') {
+            drawRacks(rightRacks, rackQty, rackIntvlPct, module, direction, 'R', rackYn)
+          }
+
+          module.set({ rightRows })
+        })
+
+        surface.set({ moduleRowsTotCnt: mostRowsModule })
+
+        if (rackYn === 'N') {
+          // rack이 없을경우
+          installBracketWithOutRack(surface, exposedBottomModules, leftExposedHalfBottomModules, rightExposedHalfBottomPoints, isChidory)
+        } else if (rackYn === 'Y') {
+          installBracket(surface)
         }
 
-        // 모듈의 오른쪽 부터 그릴 랙 정보를 가져온다.
-        const rightRacks = rackInfos.find((rack) => {
-          return rack.value.moduleRows === rightRows
-        })?.value.racks
+        const quotationParam = getTrestleParams(surface)
 
-        mostRowsModule = Math.max(rightRows, mostRowsModule)
-        // 해당 rack으로 그려준다.
-        if (rackYn === 'Y') {
-          drawRacks(rightRacks, rackQty, rackIntvlPct, module, direction, 'R', rackYn)
-        }
-
-        module.set({ rightRows })
+        surface.set({ quotationParam })
       })
 
-      surface.set({ moduleRowsTotCnt: mostRowsModule })
-
-      if (rackYn === 'N') {
-        // rack이 없을경우
-        installBracketWithOutRack(surface, exposedBottomModules, leftExposedHalfBottomModules, rightExposedHalfBottomPoints, isChidory)
-      } else if (rackYn === 'Y') {
-        installBracket(surface)
-      }
-
-      const quotationParam = getTrestleParams(surface)
-
-      surface.set({ quotationParam })
-    })
-    setQuoationItem()
+      return setEstimateData()
+    } catch (e) {
+      return false
+    }
   }
 
   // itemList 조회 후 estimateParam에 저장
-  const setQuoationItem = () => {
+  const setEstimateData = async () => {
     const surfaces = canvas.getObjects().filter((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE)
     //surfaces.pcses들을 배열로 묶는다
     const pcses = surfaces[0].pcses
@@ -461,16 +478,67 @@ export const useTrestle = () => {
     })
     const params = { trestles: surfaces.map((surface) => surface.quotationParam), pcses }
     //견적서 itemList 조회
-    getQuotationItem(params).then((res) => {
-      if (!res.data) {
-        return
-      }
-      const itemList = res.data
-      //northArrangement 북면 설치 여부
-      const northArrangement = getNorthArrangement()
+    const res = await getQuotationItem(params)
+    if (!res.data) {
+      return false
+    }
+    const itemList = res.data
+    //northArrangement 북면 설치 여부
+    const northArrangement = getNorthArrangement()
+    // circuitItemList의 경우는 moduleList에서 circuitId만 groupBy한다.
+    let circuitItemList = []
 
-      setEstimateParam({ ...estimateParam, itemList, northArrangement })
+    // roofSurfaceList 생성
+    const roofSurfaceList = surfaces.map((surface) => {
+      const parent = canvas.getObjects().find((obj) => obj.id === surface.parentId)
+      const { directionText, roofMaterial, pitch: slope, moduleCompass, surfaceCompass } = parent
+      const roofMaterialIndex = parent.roofMaterial.index
+      const { nameJp: roofMaterialIdMulti } = roofMaterial
+      const moduleSelection = moduleSelectionData?.roofConstructions?.find((construction) => construction.roofIndex === roofMaterialIndex)
+      const { constTp: constructSpecification, constTpJp: constructSpecificationMulti } = moduleSelection.construction
+      const {
+        trestleMkrCd,
+        constMthdCd: supportMethodId,
+        roofBaseCd,
+        trestleMkrCdJp: supportMeaker,
+        constMthdCdJp: supportMethodIdMulti,
+      } = moduleSelection.trestle
+
+      const modules = surface.modules
+      const moduleList = modules.map((module) => {
+        circuitItemList.push(module.pcsItemId)
+        return {
+          itemId: module.moduleInfo.itemId,
+          circuit: module.circuitNumber,
+          pcItemId: module.pcsItemId,
+        }
+      })
+
+      return {
+        roofSurfaceId: surface.id,
+        roofSurface: directionText.replace(/[^0-9]/g, ''),
+        roofMaterialId: roofMaterial.roofMatlCd,
+        supportMethodId,
+        constructSpecification,
+        constructSpecificationMulti,
+        roofMaterialIdMulti,
+        supportMethodIdMulti,
+        supportMeaker,
+        slope,
+        classType: currentAngleType === 'slope' ? '0' : '1',
+        angle: getDegreeByChon(slope),
+        azimuth: surfaceCompass ?? moduleCompass ?? 0,
+        moduleList,
+      }
     })
+
+    // circuitItemList 중복제거
+    circuitItemList = circuitItemList.filter((item, index) => circuitItemList.indexOf(item) === index)
+
+    setEstimateParam({ ...estimateParam, itemList, northArrangement, roofSurfaceList, circuitItemList })
+
+    // 정상적으로 완료 되면 true 반환
+    return true
   }
 
   const getNorthArrangement = () => {
diff --git a/src/store/estimateAtom.js b/src/store/estimateAtom.js
index 20cdaa7c..410921fc 100644
--- a/src/store/estimateAtom.js
+++ b/src/store/estimateAtom.js
@@ -14,7 +14,7 @@ export const estimateParamAtom = atom({
     standardWindSpeedId: '',
     snowfall: '',
     northArrangement: '',
-    drawingFlg: '',
+    drawingFlg: '1',
     userId: '',
     roofSurfaceList: [],
     circuitItemList: [],