diff --git a/src/components/floor-plan/modal/basic/BasicSetting.jsx b/src/components/floor-plan/modal/basic/BasicSetting.jsx
index 7165e867..2e39d160 100644
--- a/src/components/floor-plan/modal/basic/BasicSetting.jsx
+++ b/src/components/floor-plan/modal/basic/BasicSetting.jsx
@@ -186,7 +186,7 @@ export default function BasicSetting({ id, pos = { x: 50, y: 230 } }) {
                     </button>
                   </>
                 )}
-                {canvasSetting.roofSizeSet && canvasSetting.roofSizeSet === 3 && (
+                {canvasSetting.roofSizeSet && canvasSetting.roofSizeSet == 3 && (
                   <>
                     <button className={`btn-frame modal mr5 ${isManualModuleSetup ? 'act' : ''}`} onClick={handleManualModuleSetup}>
                       {getMessage('modal.module.basic.setting.passivity.placement')}
diff --git a/src/components/floor-plan/modal/basic/step/Module.jsx b/src/components/floor-plan/modal/basic/step/Module.jsx
index a574fb65..8ab6f394 100644
--- a/src/components/floor-plan/modal/basic/step/Module.jsx
+++ b/src/components/floor-plan/modal/basic/step/Module.jsx
@@ -56,12 +56,14 @@ export default function Module({ setTabNum }) {
   }, [installHeight, verticalSnowCover])
 
   useEffect(() => {
-    if (tempModuleSelectionData.roofConstructions.length > 0) {
-      if (tempModuleSelectionData.common.moduleItemId && isObjectNotEmpty(tempModuleSelectionData.module)) {
-        //저장된 temp데이터가 지붕재(addedRoofs) 개수와 같으면 모듈 선택 저장
-        setModuleSelectionData(tempModuleSelectionData)
-        if (tempModuleSelectionData.roofConstructions.length === addedRoofs.length) {
-          moduleSelectedDataTrigger(tempModuleSelectionData)
+    if (isObjectNotEmpty(tempModuleSelectionData)) {
+      if (tempModuleSelectionData.roofConstructions.length > 0) {
+        if (tempModuleSelectionData.common.moduleItemId && isObjectNotEmpty(tempModuleSelectionData.module)) {
+          //저장된 temp데이터가 지붕재(addedRoofs) 개수와 같으면 모듈 선택 저장
+          setModuleSelectionData(tempModuleSelectionData)
+          if (tempModuleSelectionData.roofConstructions.length === addedRoofs.length) {
+            moduleSelectedDataTrigger(tempModuleSelectionData)
+          }
         }
       }
     }
diff --git a/src/components/floor-plan/modal/basic/step/Placement.jsx b/src/components/floor-plan/modal/basic/step/Placement.jsx
index cc41437f..1807be60 100644
--- a/src/components/floor-plan/modal/basic/step/Placement.jsx
+++ b/src/components/floor-plan/modal/basic/step/Placement.jsx
@@ -36,17 +36,20 @@ const Placement = forwardRef((props, refs) => {
 
   //최초 지입시 체크
   useEffect(() => {
-    if (moduleSelectionData.roofConstructions.length > 0 && moduleSelectionData.module.itemList.length > 0) {
-      let initCheckedModule = {}
-      moduleSelectionData.module.itemList.forEach((obj, index) => {
-        if (index === 0) {
-          initCheckedModule = { [obj.itemId]: true }
-        } else {
-          initCheckedModule = { ...initCheckedModule, [obj.itemId]: true }
-        }
-      })
-      setSelectedItems(initCheckedModule)
-      setSelectedModules(moduleSelectionData.module)
+    if (isObjectNotEmpty(moduleSelectionData)) {
+      //두번째 선택한 데이터가를 기반으로 세번째 선택을 체크한다
+      if (moduleSelectionData.roofConstructions.length > 0 && moduleSelectionData.module.itemList.length > 0) {
+        let initCheckedModule = {}
+        moduleSelectionData.module.itemList.forEach((obj, index) => {
+          if (index === 0) {
+            initCheckedModule = { [obj.itemId]: true }
+          } else {
+            initCheckedModule = { ...initCheckedModule, [obj.itemId]: true }
+          }
+        })
+        setSelectedItems(initCheckedModule)
+        setSelectedModules(moduleSelectionData.module)
+      }
     }
   }, [moduleSelectionData])
 
diff --git a/src/hooks/module/useModuleBasicSetting.js b/src/hooks/module/useModuleBasicSetting.js
index b118f74b..2cb64313 100644
--- a/src/hooks/module/useModuleBasicSetting.js
+++ b/src/hooks/module/useModuleBasicSetting.js
@@ -19,6 +19,8 @@ import { moduleStatisticsState } from '@/store/circuitTrestleAtom'
 import { moduleSelectionDataState, selectedModuleState } from '@/store/selectedModuleOptions'
 import { useMasterController } from '@/hooks/common/useMasterController'
 import { v4 as uuidv4 } from 'uuid'
+import { useCircuitTrestle } from '@/hooks/useCirCuitTrestle'
+import { isObjectNotEmpty } from '@/util/common-utils'
 
 export function useModuleBasicSetting(tabNum) {
   const canvas = useRecoilValue(canvasState)
@@ -27,6 +29,7 @@ export function useModuleBasicSetting(tabNum) {
   const [moduleSetupSurface, setModuleSetupSurface] = useRecoilState(moduleSetupSurfaceState)
   const [moduleIsSetup, setModuleIsSetup] = useRecoilState(moduleIsSetupState)
   const { addCanvasMouseEventListener, initEvent, removeMouseEvent, addTargetMouseEventListener } = useEvent()
+  const { setModuleStatisticsData } = useCircuitTrestle()
   const { swalFire } = useSwal()
 
   const compasDeg = useRecoilValue(compasDegAtom)
@@ -60,33 +63,41 @@ export function useModuleBasicSetting(tabNum) {
 
   //모듈 선택에서 선택된 값들 넘어옴
   useEffect(() => {
-    if (moduleSelectionData) {
+    console.log('moduleSelectionData', moduleSelectionData)
+
+    console.log('canvasSetting.roofSizeSet', canvasSetting.roofSizeSet)
+
+    if (isObjectNotEmpty(moduleSelectionData)) {
       if (canvasSetting.roofSizeSet !== '3') {
         const common = moduleSelectionData.common
         const roofConstructions = moduleSelectionData.roofConstructions
 
-        const listParams = roofConstructions.map((item) => {
-          return {
-            ...common,
-            // moduleTpCd: selectedModules.itemTp,
-            roofMatlCd: item.trestle.roofMatlCd,
-            trestleMkrCd: item.trestle.trestleMkrCd,
-            constMthdCd: item.trestle.constMthdCd,
-            roofBaseCd: item.trestle.roofBaseCd,
-            constTp: item.construction.constTp,
-            mixMatlNo: selectedModules.mixMatlNo,
-            roofPitch: item.addRoof.hajebichi ? item.addRoof.hajebichi : 0,
-            inclCd: String(item.addRoof.pitch),
-            roofIndex: item.addRoof.index,
-            workingWidth: item.addRoof.lenBase,
-            raftBaseCd: item.trestle.raftBaseCd,
-          }
-        })
-        setTrestleDetailParams(listParams)
+        console.log('roofConstructions', roofConstructions)
 
-        //북면 설치 가능 판매점
-        if (moduleSelectionData.common.saleStoreNorthFlg === '1') {
-          setSaleStoreNorthFlg(true)
+        if (roofConstructions && roofConstructions.length > 0) {
+          const listParams = roofConstructions.map((item) => {
+            return {
+              ...common,
+              // moduleTpCd: selectedModules.itemTp,
+              roofMatlCd: item.trestle.roofMatlCd,
+              trestleMkrCd: item.trestle.trestleMkrCd,
+              constMthdCd: item.trestle.constMthdCd,
+              roofBaseCd: item.trestle.roofBaseCd,
+              constTp: item.construction.constTp,
+              mixMatlNo: selectedModules.mixMatlNo,
+              roofPitch: item.addRoof.hajebichi ? item.addRoof.hajebichi : 0,
+              inclCd: String(item.addRoof.pitch),
+              roofIndex: item.addRoof.index,
+              workingWidth: item.addRoof.lenBase,
+              raftBaseCd: item.trestle.raftBaseCd,
+            }
+          })
+          setTrestleDetailParams(listParams)
+
+          //북면 설치 가능 판매점
+          if (moduleSelectionData.common.saleStoreNorthFlg === '1') {
+            setSaleStoreNorthFlg(true)
+          }
         }
       } else {
         //육지붕 일경우에는 바로 배치면 설치LL
@@ -140,6 +151,9 @@ export function useModuleBasicSetting(tabNum) {
     }
   }, [trestleDetailList])
 
+  //선택 배치면 배열`
+  let selectedModuleInstSurfaceArray = []
+
   //가대 상세 데이터 기준으로 모듈 설치 배치면 생성
   const makeModuleInstArea = (roof, trestleDetail) => {
     //지붕 객체 반환
@@ -272,8 +286,6 @@ export function useModuleBasicSetting(tabNum) {
       }
     }
 
-    let selectedModuleInstSurfaceArray = []
-
     //설치 범위 지정 클릭 이벤트
     const toggleSelection = (setupSurface) => {
       const isExist = selectedModuleInstSurfaceArray.some((obj) => obj.parentId === setupSurface.parentId)
@@ -297,6 +309,9 @@ export function useModuleBasicSetting(tabNum) {
 
         canvas?.renderAll()
         selectedModuleInstSurfaceArray.push(setupSurface)
+
+        console.log('selectedModuleInstSurfaceArray', selectedModuleInstSurfaceArray)
+
         setCurrentObject({ name: 'moduleSetupSurface', arrayData: [...selectedModuleInstSurfaceArray] })
       } else {
         //선택후 재선택하면 선택안됨으로 변경
@@ -344,8 +359,10 @@ export function useModuleBasicSetting(tabNum) {
   }
 
   useEffect(() => {
-    if (moduleSelectionData.common.saleStoreNorthFlg === '1') {
-      setSaleStoreNorthFlg(true)
+    if (canvasSetting.roofSizeSet !== '3') {
+      if (isObjectNotEmpty(moduleSelectionData) && moduleSelectionData.common.saleStoreNorthFlg === '1') {
+        setSaleStoreNorthFlg(true)
+      }
     }
   }, [isManualModuleSetup])
 
@@ -659,6 +676,7 @@ export function useModuleBasicSetting(tabNum) {
                 let manualModule = new QPolygon(tempModule.points, { ...moduleOptions, moduleInfo: checkedModule[0] })
                 canvas?.add(manualModule)
                 manualDrawModules.push(manualModule)
+                setModuleStatisticsData()
                 getModuleStatistics()
               } else {
                 swalFire({ text: getMessage('module.place.overlab') })
@@ -821,7 +839,7 @@ export function useModuleBasicSetting(tabNum) {
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
 
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
         //육지붕이 아닐때만 넣는다 육지붕일땐 클릭 이벤트에 별도로 넣어놓음
         let startPoint = flowLines.bottom
         const moduleArray = []
@@ -910,8 +928,9 @@ export function useModuleBasicSetting(tabNum) {
                 moduleArray.push(tempModule)
               }
             } else {
-              // tempModule.set({ fill: 'rgba(255,190,41, 0.4)', stroke: 'black', strokeWidth: 1 })
-              // canvas?.add(tempModule)
+              //디버깅용
+              tempModule.set({ fill: 'rgba(255,190,41, 0.4)', stroke: 'black', strokeWidth: 1 })
+              canvas?.add(tempModule)
             }
           }
         }
@@ -933,7 +952,7 @@ export function useModuleBasicSetting(tabNum) {
 
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
         //육지붕이 아닐때만 넣는다 육지붕일땐 클릭 이벤트에 별도로 넣어놓음
         let startPoint = flowLines.left
         const moduleArray = []
@@ -1011,6 +1030,10 @@ export function useModuleBasicSetting(tabNum) {
                 moduleSetupArray.push(tempModule)
                 moduleArray.push(tempModule)
               }
+            } else {
+              //디버깅용
+              tempModule.set({ fill: 'rgba(255,190,41, 0.4)', stroke: 'black', strokeWidth: 1 })
+              canvas?.add(tempModule)
             }
           }
         }
@@ -1032,7 +1055,7 @@ export function useModuleBasicSetting(tabNum) {
 
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
         let startPoint = flowLines.top
         const moduleArray = []
 
@@ -1123,6 +1146,10 @@ export function useModuleBasicSetting(tabNum) {
                 moduleSetupArray.push(tempModule)
                 moduleArray.push(tempModule)
               }
+            } else {
+              //디버깅용
+              tempModule.set({ fill: 'rgba(255,190,41, 0.4)', stroke: 'black', strokeWidth: 1 })
+              canvas?.add(tempModule)
             }
           }
         }
@@ -1144,7 +1171,7 @@ export function useModuleBasicSetting(tabNum) {
 
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
         let startPoint = flowLines.right
         const moduleArray = []
 
@@ -1222,6 +1249,10 @@ export function useModuleBasicSetting(tabNum) {
                 moduleSetupArray.push(tempModule)
                 moduleArray.push(tempModule)
               }
+            } else {
+              //디버깅용
+              tempModule.set({ fill: 'rgba(255,190,41, 0.4)', stroke: 'black', strokeWidth: 1 })
+              canvas?.add(tempModule)
             }
           }
         }
@@ -1358,7 +1389,9 @@ export function useModuleBasicSetting(tabNum) {
     return hull
   }
 
-  const bottomTopFlowLine = (surface, module) => {
+  const bottomTopFlowLine = (surface, width) => {
+    console.log('bottom', width)
+
     const flowArray = []
 
     const bottomFlow = surface.lines.reduce(
@@ -1417,7 +1450,7 @@ export function useModuleBasicSetting(tabNum) {
       const angle2 = Math.abs(Math.round(Math.atan(height2 / adjust2) * (180 / Math.PI) * 1000) / 1000)
       const angle3 = 180 - (angle1 + angle2)
 
-      const charlie = Number(module.longAxis) / 10 + 3 // 평행선길이 약간 여유를 줌
+      const charlie = Number(width) + 3 // 평행선길이 약간 여유를 줌
       const alpha = (charlie * Math.sin((angle1 * Math.PI) / 180)) / Math.sin((angle3 * Math.PI) / 180)
       const beta = Math.sqrt(alpha ** 2 + charlie ** 2 - 2 * alpha * charlie * Math.cos((angle2 * Math.PI) / 180))
       const h = beta * Math.sin((angle1 * Math.PI) / 180) // 높이
@@ -1476,7 +1509,9 @@ export function useModuleBasicSetting(tabNum) {
     return rtnObjArray
   }
 
-  const leftRightFlowLine = (surface, module) => {
+  const leftRightFlowLine = (surface, width) => {
+    console.log('left', width)
+
     const flowArray = []
     const leftFlow = surface.lines.reduce(
       (acc, line, index) => {
@@ -1532,7 +1567,7 @@ export function useModuleBasicSetting(tabNum) {
       const angle2 = Math.abs(Math.round(Math.atan(adjust2 / height2) * (180 / Math.PI) * 1000) / 1000)
       const angle3 = 180 - (angle1 + angle2)
 
-      const charlie = Number(module.shortAxis) / 10 + 3 // 평행선길이 약간 여유를 줌
+      const charlie = Number(width) + 3 // 평행선길이 약간 여유를 줌
       const alpha = (charlie * Math.sin((angle1 * Math.PI) / 180)) / Math.sin((angle3 * Math.PI) / 180)
       const beta = Math.sqrt(alpha ** 2 + charlie ** 2 - 2 * alpha * charlie * Math.cos((angle2 * Math.PI) / 180))
 
@@ -2166,7 +2201,7 @@ export function useModuleBasicSetting(tabNum) {
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
 
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
 
         let startPoint = flowLines.bottom
 
@@ -2212,7 +2247,7 @@ export function useModuleBasicSetting(tabNum) {
     const flatRoofLeftFlowSetupModule = (surfaceMaxLines, maxLengthLine, moduleSetupArray, moduleSetupSurface, marginWidth, marginHeight) => {
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
         let startPoint = flowLines.left
 
         const maxRightEndPoint = surfaceMaxLines.right.x1 //최 우측
@@ -2257,7 +2292,7 @@ export function useModuleBasicSetting(tabNum) {
     const flatRoofTopFlowSetupModule = (surfaceMaxLines, maxLengthLine, moduleSetupArray, moduleSetupSurface, marginWidth, marginHeight) => {
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
         let startPoint = flowLines.top
 
         const maxLeftEndPoint = surfaceMaxLines.left.x1 //최 좌측
@@ -2304,7 +2339,7 @@ export function useModuleBasicSetting(tabNum) {
     const flatRoofRightFlowSetupModule = (surfaceMaxLines, moduleSetupArray, moduleSetupSurface, marginWidth, marginHeight) => {
       checkedModule.forEach((module, index) => {
         const { width, height } = getModuleWidthHeight(maxLengthLine, moduleSetupSurface, module)
-        const flowLines = getFlowLines(moduleSetupSurface, module)
+        const flowLines = getFlowLines(moduleSetupSurface, width)
         let startPoint = flowLines.right
 
         const maxLeftEndPoint = surfaceMaxLines.left.x1 //최 좌측
@@ -2539,14 +2574,14 @@ export function useModuleBasicSetting(tabNum) {
       : { width: tmpWidth, height: tmpHeight }
   }
 
-  const getFlowLines = (moduleSetupSurface, module) => {
+  const getFlowLines = (moduleSetupSurface, width) => {
     let flowLines = {}
 
     flowLines = {
-      bottom: bottomTopFlowLine(moduleSetupSurface, module).find((obj) => obj.target === 'bottom'),
-      top: bottomTopFlowLine(moduleSetupSurface, module).find((obj) => obj.target === 'top'),
-      left: leftRightFlowLine(moduleSetupSurface, module).find((obj) => obj.target === 'left'),
-      right: leftRightFlowLine(moduleSetupSurface, module).find((obj) => obj.target === 'right'),
+      bottom: bottomTopFlowLine(moduleSetupSurface, width).find((obj) => obj.target === 'bottom'),
+      top: bottomTopFlowLine(moduleSetupSurface, width).find((obj) => obj.target === 'top'),
+      left: leftRightFlowLine(moduleSetupSurface, width).find((obj) => obj.target === 'left'),
+      right: leftRightFlowLine(moduleSetupSurface, width).find((obj) => obj.target === 'right'),
     }
     return flowLines
   }
diff --git a/src/hooks/module/useModuleTabContents.js b/src/hooks/module/useModuleTabContents.js
index 7afcfbff..1f79efb3 100644
--- a/src/hooks/module/useModuleTabContents.js
+++ b/src/hooks/module/useModuleTabContents.js
@@ -53,6 +53,8 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
   const hajebichiRef = useRef()
   const lengthRef = useRef()
 
+  const [isChangeInitData, setIsChangeInitData] = useState(false)
+
   //서까래간격 변경
   const handleChangeRaftBase = (option) => {
     setSelectedRaftBase(option)
@@ -107,11 +109,15 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
   //리코일에 데이터가 담기는 시점에 시작
   useEffect(() => {
     if (
+      isObjectNotEmpty(moduleSelectionData) &&
       isObjectNotEmpty(moduleSelectionData.roofConstructions[tabIndex]) &&
       isObjectNotEmpty(moduleSelectionData.roofConstructions[tabIndex].trestle) &&
       isObjectNotEmpty(moduleSelectionData.roofConstructions[tabIndex].construction)
     ) {
-      setModuleConstructionSelectionData(moduleSelectionData.roofConstructions[tabIndex])
+      // console.log('moduleSelectionData', moduleSelectionData)
+
+      const roofConstructions = moduleSelectionData.roofConstructions.filter((item) => item.roofIndex === tabIndex)[0]
+      setModuleConstructionSelectionData(roofConstructions)
     }
   }, [moduleSelectionData])
 
@@ -121,18 +127,18 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
     }
   }, [moduleConstructionSelectionData])
 
-  // useEffect(() => {
-  //   if (isExistData) {
-  //     setConstructionListParams({
-  //       ...moduleSelectionInitParams,
-  //       ...roofBaseParams,
-  //       roofBaseCd: selectedRoofBase.roofBaseCd,
-  //       inclCd: addRoof.pitch,
-  //       roofPitch: hajebichiRef.current ? hajebichiRef.current.value : 0,
-  //       raftBaseCd: selectedRaftBase.raftBaseCd ? selectedRaftBase.raftBaseCd : '',
-  //     })
-  //   }
-  // }, [selectedRoofBase])
+  useEffect(() => {
+    if (isExistData) {
+      setConstructionListParams({
+        ...moduleSelectionInitParams,
+        ...roofBaseParams,
+        roofBaseCd: selectedRoofBase.roofBaseCd,
+        inclCd: addRoof.pitch,
+        roofPitch: hajebichiRef.current ? hajebichiRef.current.value : 0,
+        raftBaseCd: selectedRaftBase.raftBaseCd ? selectedRaftBase.raftBaseCd : '',
+      })
+    }
+  }, [selectedRoofBase])
 
   useEffect(() => {
     if (
@@ -173,9 +179,11 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
 
   //가대메이커 변경 함수
   const handleChangeTrestle = (option) => {
-    option.raftBaseCd = selectedRaftBase.raftBaseCd
-    setSelectedTrestle(option) //선택값  저장
-    setConstructionParams({ ...trestleParams, trestleMkrCd: option.trestleMkrCd, constMthdCd: '', roofBaseCd: '' })
+    if (isObjectNotEmpty(option)) {
+      option.raftBaseCd = selectedRaftBase.raftBaseCd
+      setSelectedTrestle(option) //선택값  저장
+      setConstructionParams({ ...trestleParams, trestleMkrCd: option.trestleMkrCd, constMthdCd: '', roofBaseCd: '' })
+    }
   }
 
   useEffect(() => {
@@ -186,13 +194,15 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
 
   //공법 변경
   const handleChangeConstMthd = (option) => {
-    setSelectedConstMthd(option) //선택된값 저장
-    setRoofBaseParams({
-      ...trestleParams,
-      trestleMkrCd: selectedTrestle.trestleMkrCd,
-      constMthdCd: option.constMthdCd,
-      roofBaseCd: '',
-    })
+    if (isObjectNotEmpty(option)) {
+      setSelectedConstMthd(option) //선택된값 저장
+      setRoofBaseParams({
+        ...trestleParams,
+        trestleMkrCd: selectedTrestle.trestleMkrCd,
+        constMthdCd: option.constMthdCd,
+        roofBaseCd: '',
+      })
+    }
   }
 
   useEffect(() => {
@@ -202,17 +212,19 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
   }, [roofBaseParams])
 
   const handleChangeRoofBase = (option) => {
-    setConstructionListParams({
-      ...moduleSelectionInitParams,
-      trestleMkrCd: selectedTrestle.trestleMkrCd,
-      constMthdCd: selectedConstMthd.constMthdCd,
-      roofBaseCd: option.roofBaseCd,
-      inclCd: addRoof.pitch,
-      roofPitch: hajebichiRef.current ? hajebichiRef.current.value : 0,
-      raftBaseCd: selectedRaftBase.clCode ? selectedRaftBase.clCode : '',
-      roofMatlCd: addRoof.roofMatlCd,
-    })
-    setSelectedRoofBase(option)
+    if (isObjectNotEmpty(option)) {
+      setConstructionListParams({
+        ...moduleSelectionInitParams,
+        trestleMkrCd: selectedTrestle.trestleMkrCd,
+        constMthdCd: selectedConstMthd.constMthdCd,
+        roofBaseCd: option.roofBaseCd,
+        inclCd: addRoof.pitch,
+        roofPitch: hajebichiRef.current ? hajebichiRef.current.value : 0,
+        raftBaseCd: selectedRaftBase.clCode ? selectedRaftBase.clCode : '',
+        roofMatlCd: addRoof.roofMatlCd,
+      })
+      setSelectedRoofBase(option)
+    }
   }
 
   //공법 리스트 변경 함수
@@ -275,7 +287,7 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
         construction: selectedConstruction,
       }
 
-      const index = tempModuleSelectionData.roofConstructions.findIndex((obj) => obj.roofIndex === tabIndex)
+      const index = moduleSelectionData.roofConstructions.findIndex((obj) => obj.roofIndex === tabIndex)
 
       if (index > -1) {
         const newArray = [
@@ -301,7 +313,7 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
       if (type === 'trestle') {
         //가대 메이커일때
         setTrestleList(optionsList.data) //가대 목록
-        if (isExistData) {
+        if (isExistData && isObjectNotEmpty(moduleConstructionSelectionData?.trestle)) {
           //데이터가 있으면 선택된 가대 메이커를 선택한다
           handleChangeTrestle(moduleConstructionSelectionData?.trestle)
         } else {
@@ -311,7 +323,7 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
       } else if (type === 'construction') {
         //공법일때
         setConstMthdList(optionsList.data) //공법 목록
-        if (isExistData) {
+        if (isExistData && isObjectNotEmpty(moduleConstructionSelectionData?.construction)) {
           //데이터가 있으면 선택된 공법을 선택한다
           handleChangeConstMthd(moduleConstructionSelectionData?.trestle)
         } else {
@@ -320,7 +332,7 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
       } else if (type === 'roofBase') {
         //지붕밑바탕일때
         setRoofBaseList(optionsList.data) //지붕밑바탕 목록
-        if (isExistData) {
+        if (isExistData && isObjectNotEmpty(moduleConstructionSelectionData?.trestle)) {
           //데이터가 있으면 선택된 지붕밑바탕을 선택한다
           handleChangeRoofBase(moduleConstructionSelectionData?.trestle) //선택된 지붕밑바탕을 선택한다
         }
@@ -330,15 +342,27 @@ export function useModuleTabContents({ tabIndex, addRoof, setAddedRoofs, roofTab
 
   useEffect(() => {
     //모듈이 선택되어있을때
-    if (moduleSelectionInitOriginData.current.moduleItemId && moduleSelectionInitOriginData.current.moduleTpCd) {
-      //초기에 들어온 데이터가 수정된 데이터가 값이 다르다면`
-      if (!isEqualObjects(moduleSelectionInitOriginData.current, moduleSelectionInitParams)) {
-        resetSelected()
+    //초기 데이터가 모두 들어있을 경우에 초기 데이터를 저장한다
+    if (
+      moduleSelectionInitParams.illuminationTp &&
+      moduleSelectionInitParams.illuminationTpNm &&
+      moduleSelectionInitParams.instHt &&
+      moduleSelectionInitParams.moduleItemId &&
+      moduleSelectionInitParams.moduleTpCd &&
+      moduleSelectionInitParams.saleStoreNorthFlg &&
+      moduleSelectionInitParams.stdSnowLd &&
+      moduleSelectionInitParams.stdWindSpeed
+    ) {
+      if (!isObjectNotEmpty(moduleSelectionInitOriginData.current)) {
+        moduleSelectionInitOriginData.current = moduleSelectionInitParams
       }
     }
 
-    if (moduleSelectionInitParams.moduleItemId && moduleSelectionInitParams.moduleTpCd) {
-      moduleSelectionInitOriginData.current = moduleSelectionInitParams
+    if (
+      isObjectNotEmpty(moduleSelectionInitOriginData.current) &&
+      !isEqualObjects(moduleSelectionInitOriginData.current, moduleSelectionInitParams)
+    ) {
+      resetSelected()
     }
   }, [moduleSelectionInitParams])
 
diff --git a/src/hooks/option/useCanvasSetting.js b/src/hooks/option/useCanvasSetting.js
index 360a4774..c5ce450c 100644
--- a/src/hooks/option/useCanvasSetting.js
+++ b/src/hooks/option/useCanvasSetting.js
@@ -38,6 +38,7 @@ import { usePopup } from '../usePopup'
 import { FloorPlanContext } from '@/app/floor-plan/FloorPlanProvider'
 import { moduleSelectionDataState, selectedModuleState } from '@/store/selectedModuleOptions'
 import { useCommonCode } from '@/hooks/common/useCommonCode'
+import { useCanvasPopupStatusController } from '@/hooks/common/useCanvasPopupStatusController'
 
 const defaultDotLineGridSetting = {
   INTERVAL: {
@@ -120,6 +121,8 @@ export function useCanvasSetting() {
   const resetModuleSelectionData = useResetRecoilState(moduleSelectionDataState) //다음으로 넘어가는 최종 데이터
   const resetSelectedModules = useResetRecoilState(selectedModuleState) //선택된 모듈
 
+  const { trigger: moduleSelectedDataTrigger } = useCanvasPopupStatusController(2)
+
   const [raftCodes, setRaftCodes] = useState([]) // 서까래 정보
   const { findCommonCode } = useCommonCode()
   const [currentRoof, setCurrentRoof] = useState(null) // 현재 선택된 지붕재 정보
@@ -473,6 +476,7 @@ export function useCanvasSetting() {
 
       //모듈 선택 데이터 초기화
       resetModuleSelectionData()
+      moduleSelectedDataTrigger({ common: {}, module: {}, roofConstructions: [] })
 
       const isModuleExist = canvas.getObjects().some((obj) => obj.name === POLYGON_TYPE.MODULE)
       if (!isModuleExist) {
diff --git a/src/hooks/useCirCuitTrestle.js b/src/hooks/useCirCuitTrestle.js
index b216d3af..ac8b85ff 100644
--- a/src/hooks/useCirCuitTrestle.js
+++ b/src/hooks/useCirCuitTrestle.js
@@ -196,12 +196,12 @@ export function useCircuitTrestle() {
     const tempHeader = [
       { name: getMessage('simulator.table.sub1'), prop: 'name' },
       { name: getMessage('modal.circuit.trestle.setting.circuit.allocation.passivity.circuit'), prop: 'circuit' },
-      ...moduleSelectionData.module?.itemList?.map((module) => {
-        return {
-          name: module.itemNm,
-          prop: module.itemId,
-        }
-      }),
+      // ...moduleSelectionData.module?.itemList?.map((module) => {
+      //   return {
+      //     name: module.itemNm,
+      //     prop: module.itemId,
+      //   }
+      // }),
       { name: `${getMessage('modal.panel.batch.statistic.power.generation.amount')}(kW)`, prop: 'wpOut' },
     ]
     const surfaceObjects = {}