[1436]처마 커버의 처음 체크

src/components/auth/Join.jsx

@@ -98,6 +98,10 @@ export default function Join() {
       alert(getMessage('common.message.required.data', [getMessage('join.sub1.fax')]))
       faxRef.current.focus()
       return false
+    }else if (!telRegex.test(fax)) {
+      alert(getMessage('join.validation.check1', [getMessage('join.sub1.fax')]))
+      faxRef.current.focus()
+      return false
     }
 
     const bizNo = formData.get('bizNo')
@@ -174,6 +178,10 @@ export default function Join() {
       alert(getMessage('common.message.required.data', [getMessage('join.sub2.fax')]))
       userFaxRef.current.focus()
       return false
+    } else if (!telRegex.test(userFax)) {
+      alert(getMessage('join.validation.check1', [getMessage('join.sub2.fax')]))
+      userFaxRef.current.focus()
+      return false
     }
 
     return true
@@ -349,7 +357,15 @@ export default function Join() {
                       <th>{getMessage('join.sub1.fax')}<span className="important">*</span></th>
                       <td>
                         <div className="input-wrap" style={{ width: '200px' }}>
-                          <input type="text" id="fax" name="fax" className="input-light" maxLength={15} onChange={inputNumberCheck} ref={faxRef} />
+                          <input
+                            type="text"
+                            id="fax"
+                            name="fax"
+                            className="input-light"
+                            maxLength={15}
+                            placeholder={getMessage('join.sub1.telNo_placeholder')}
+                            onChange={inputTelNumberCheck}
+                            ref={faxRef} />
                         </div>
                       </td>
                     </tr>
@@ -466,7 +482,8 @@ export default function Join() {
                             name="userFax"
                             className="input-light"
                             maxLength={15}
-                            onChange={inputNumberCheck}
+                            placeholder={getMessage('join.sub1.telNo_placeholder')}
+                            onChange={inputTelNumberCheck}
                             ref={userFaxRef}
                           />
                         </div>

src/components/floor-plan/modal/basic/step/Trestle.jsx

@@ -859,7 +859,7 @@ const Trestle = forwardRef((props, ref) => {
                     type="checkbox"
                     id={`ch01`}
                     disabled={!cvrYn || cvrYn === 'N'}
-                    checked={cvrChecked || true}
+                    checked={cvrChecked ?? false}
                     // onChange={() => dispatch({ type: 'SET_TRESTLE_DETAIL', roof: { ...trestleState, cvrChecked: !trestleState.cvrChecked } })}
                     onChange={() => setCvrChecked(!cvrChecked)}
                   />

src/components/floor-plan/modal/circuitTrestle/CircuitTrestleSetting.jsx

@@ -124,6 +124,9 @@ export default function CircuitTrestleSetting({ id }) {
      */
     const validateModuleSizeForRack = (surface) => {
       const { modules, direction, trestleDetail } = surface
+      if (!trestleDetail) {
+        return true // 상세 정보 없음
+      }
       const { rackYn, moduleIntvlHor, moduleIntvlVer } = trestleDetail
 
       if (rackYn === 'N' || !modules || modules.length < 2) {

src/hooks/common/useCommonUtils.js

@@ -13,6 +13,7 @@ import { usePolygon } from '@/hooks/usePolygon'
 import { useObjectBatch } from '@/hooks/object/useObjectBatch'
 import { BATCH_TYPE } from '@/common/common'
 import { useMouse } from '@/hooks/useMouse'
+import { QPolygon } from '@/components/fabric/QPolygon'
 
 export function useCommonUtils() {
   const canvas = useRecoilValue(canvasState)
@@ -617,6 +618,168 @@ export function useCommonUtils() {
 
         const buttonAct = dormerName == BATCH_TYPE.TRIANGLE_DORMER ? 3 : 4
         applyDormers(dormerParams, buttonAct)
+      } else if (obj.name === 'roof' && obj.type === 'QPolygon') {
+        // roof(QPolygon) 객체는 순환 참조(lines[].parent -> polygon)로 인해
+        // fabric.clone() 사용 시 Maximum call stack size exceeded 에러 발생
+        // getCurrentPoints()를 사용하여 새 QPolygon을 직접 생성
+
+        // 원본 객체의 line attributes 복사 (순환 참조 제거)
+        const lineAttributes = obj.lines.map((line) => ({
+          type: line.attributes?.type,
+          offset: line.attributes?.offset,
+          actualSize: line.attributes?.actualSize,
+          planeSize: line.attributes?.planeSize,
+        }))
+
+        // 원본 roof의 자식 오브젝트들 찾기 (개구, 그림자, 도머 등)
+        const childObjectTypes = [BATCH_TYPE.OPENING, BATCH_TYPE.SHADOW, BATCH_TYPE.TRIANGLE_DORMER, BATCH_TYPE.PENTAGON_DORMER]
+        const childObjects = canvas.getObjects().filter(
+          (o) => o.parentId === obj.id && childObjectTypes.includes(o.name)
+        )
+
+        // 원본 roof 중심점 계산
+        const originalPoints = obj.getCurrentPoints()
+        const originalCenterX = originalPoints.reduce((sum, p) => sum + p.x, 0) / originalPoints.length
+        const originalCenterY = originalPoints.reduce((sum, p) => sum + p.y, 0) / originalPoints.length
+
+        let clonedObj = null
+        let clonedChildren = []
+
+        addCanvasMouseEventListener('mouse:move', (e) => {
+          const pointer = canvas?.getPointer(e.e)
+
+          // 이전 임시 객체들 제거
+          canvas
+            .getObjects()
+            .filter((o) => o.name === 'clonedObj' || o.name === 'clonedChildTemp')
+            .forEach((o) => canvas?.remove(o))
+
+          // 새 QPolygon 생성 (매 move마다 생성하여 위치 업데이트)
+          const currentPoints = obj.getCurrentPoints()
+          const centerX = currentPoints.reduce((sum, p) => sum + p.x, 0) / currentPoints.length
+          const centerY = currentPoints.reduce((sum, p) => sum + p.y, 0) / currentPoints.length
+
+          // 이동 오프셋 계산
+          const offsetX = pointer.x - centerX
+          const offsetY = pointer.y - centerY
+
+          // 포인터 위치로 이동된 새 points 계산
+          const newPoints = currentPoints.map((p) => ({
+            x: p.x + offsetX,
+            y: p.y + offsetY,
+          }))
+
+          clonedObj = new QPolygon(newPoints, {
+            fill: obj.fill || 'transparent',
+            stroke: obj.stroke || 'black',
+            strokeWidth: obj.strokeWidth || 1,
+            fontSize: 0, // 이동 중에는 lengthText 생성하지 않음 (fontSize=0이면 addLengthText가 스킵됨)
+            selectable: true,
+            lockMovementX: true,
+            lockMovementY: true,
+            lockRotation: true,
+            lockScalingX: true,
+            lockScalingY: true,
+            name: 'clonedObj',
+            originX: 'center',
+            originY: 'center',
+            pitch: obj.pitch,
+            surfaceId: obj.surfaceId,
+            sort: false,
+          }, canvas)
+
+          canvas.add(clonedObj)
+
+          // 자식 오브젝트들도 이동해서 미리보기 표시
+          clonedChildren = []
+          childObjects.forEach((child) => {
+            child.clone((clonedChild) => {
+              clonedChild.set({
+                left: child.left + offsetX,
+                top: child.top + offsetY,
+                name: 'clonedChildTemp',
+                selectable: false,
+                evented: false,
+              })
+              clonedChildren.push({ original: child, cloned: clonedChild })
+              canvas.add(clonedChild)
+            })
+          })
+
+          canvas.renderAll()
+        })
+
+        addCanvasMouseEventListener('mouse:down', (e) => {
+          if (!clonedObj) return
+
+          const newRoofId = uuidv4()
+
+          clonedObj.set({
+            lockMovementX: true,
+            lockMovementY: true,
+            name: 'roof',
+            editable: false,
+            selectable: true,
+            id: newRoofId,
+            direction: obj.direction,
+            directionText: obj.directionText,
+            roofMaterial: obj.roofMaterial,
+            stroke: 'black',
+            evented: true,
+            isFixed: false,
+            fontSize: lengthTextFont.fontSize.value, // 최종 확정 시 fontSize 설정
+          })
+
+          // line attributes 복원
+          lineAttributes.forEach((attr, index) => {
+            if (clonedObj.lines[index]) {
+              clonedObj.lines[index].set({ attributes: attr })
+            }
+          })
+
+          // 임시 자식 오브젝트들 제거
+          canvas
+            .getObjects()
+            .filter((o) => o.name === 'clonedChildTemp')
+            .forEach((o) => canvas?.remove(o))
+
+          // 자식 오브젝트들 최종 복사 (새 roof의 id를 parentId로 설정)
+          const pointer = canvas?.getPointer(e.e)
+          const currentPoints = obj.getCurrentPoints()
+          const centerX = currentPoints.reduce((sum, p) => sum + p.x, 0) / currentPoints.length
+          const centerY = currentPoints.reduce((sum, p) => sum + p.y, 0) / currentPoints.length
+          const offsetX = pointer.x - centerX
+          const offsetY = pointer.y - centerY
+
+          childObjects.forEach((child) => {
+            child.clone((clonedChild) => {
+              clonedChild.set({
+                left: child.left + offsetX,
+                top: child.top + offsetY,
+                id: uuidv4(),
+                parentId: newRoofId, // 새 roof의 id를 부모로 설정
+                name: child.name,
+                selectable: true,
+                evented: true,
+              })
+              // 그룹 객체인 경우 groupId도 새로 설정
+              if (clonedChild.type === 'group') {
+                clonedChild.set({ groupId: uuidv4() })
+              }
+              canvas.add(clonedChild)
+            })
+          })
+
+          clonedObj.fire('polygonMoved')
+          clonedObj.fire('modified')
+          clonedObj.setCoords()
+          canvas.setActiveObject(clonedObj)
+          canvas.renderAll()
+          addLengthText(clonedObj) // fontSize가 설정된 후 lengthText 추가
+          drawDirectionArrow(clonedObj)
+
+          initEvent()
+        })
       } else {
         let clonedObj = null
 
@@ -655,32 +818,6 @@ export function useCommonUtils() {
           //객체가 그룹일 경우에는 그룹 아이디를 따로 넣어준다
           if (clonedObj.type === 'group') clonedObj.set({ groupId: uuidv4() })
 
-          //배치면일 경우
-          if (obj.name === 'roof') {
-            clonedObj.canvas = canvas // canvas 참조 설정
-            clonedObj.set({
-              direction: obj.direction,
-              directionText: obj.directionText,
-              roofMaterial: obj.roofMaterial,
-              stroke: 'black', // 복사된 객체는 선택 해제 상태의 색상으로 설정
-              selectable: true, // 선택 가능하도록 설정
-              evented: true, // 마우스 이벤트를 받을 수 있도록 설정
-              isFixed: false, // containsPoint에서 특별 처리 방지
-            })
-
-            obj.lines.forEach((line, index) => {
-              clonedObj.lines[index].set({ attributes: line.attributes })
-            })
-
-            clonedObj.fire('polygonMoved') // 내부 좌표 재계산 (points, pathOffset)
-            clonedObj.fire('modified')
-            clonedObj.setCoords() // 모든 속성 설정 후 좌표 업데이트
-            canvas.setActiveObject(clonedObj)
-            canvas.renderAll()
-            addLengthText(clonedObj) //수치 추가
-            drawDirectionArrow(clonedObj) //방향 화살표 추가
-          }
-
           initEvent()
         })
       }

src/hooks/module/useModule.js

@@ -749,7 +749,7 @@ export function useModule() {
     const copyModules = []
     const moduleSetupSurface = canvas.getObjects().find((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE && obj.id === activeModule.surfaceId)
     let isWarning = false
-    const { moduleIntvlHor, moduleIntvlVer } = moduleSetupSurface.trestleDetail
+    const { moduleIntvlHor = 0, moduleIntvlVer = 0 } = moduleSetupSurface.trestleDetail || {}
     canvas.discardActiveObject()
     targetModules.forEach((module) => {
       const { top, left } = getPosotion(module, type, moduleIntvlHor, true)
@@ -859,7 +859,7 @@ export function useModule() {
     const copyModules = []
     const moduleSetupSurface = canvas.getObjects().find((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE && obj.id === activeModule.surfaceId)
     let isWarning = false
-    const { moduleIntvlHor, moduleIntvlVer } = moduleSetupSurface.trestleDetail
+    const { moduleIntvlHor = 0, moduleIntvlVer = 0 } = moduleSetupSurface.trestleDetail || {}
     canvas.discardActiveObject()
     targetModules.forEach((module) => {
       const { top, left } = getPosotion(module, type, moduleIntvlVer, true)

src/hooks/module/useModuleBasicSetting.js

@@ -17,7 +17,7 @@ import {
 import { calculateVisibleModuleHeight, getDegreeByChon, polygonToTurfPolygon, rectToPolygon, toFixedWithoutRounding } from '@/util/canvas-util'
 import '@/util/fabric-extensions' // fabric 객체들에 getCurrentPoints 메서드 추가
 import { basicSettingState, roofDisplaySelector } from '@/store/settingAtom'
-import offsetPolygon, { calculateAngle, createLinesFromPolygon, cleanSelfIntersectingPolygon } from '@/util/qpolygon-utils'
+import offsetPolygon, { calculateAngle, cleanSelfIntersectingPolygon, createLinesFromPolygon } from '@/util/qpolygon-utils'
 import { QPolygon } from '@/components/fabric/QPolygon'
 import { useEvent } from '@/hooks/useEvent'
 import { BATCH_TYPE, LINE_TYPE, MODULE_SETUP_TYPE, POLYGON_TYPE } from '@/common/common'
@@ -338,10 +338,27 @@ export function useModuleBasicSetting(tabNum) {
       })
 
       let isNorth = false
+      const defaultTrestleDetail = {
+        rackYn: 'N',
+        moduleIntvlHor: +roofSizeSet === 3 ? 300 : 0,
+        moduleIntvlVer: +roofSizeSet === 3 ? 100 : 0,
+        rack: null,
+        rackQty: 0,
+        rackIntvlPct: 0,
+        cvrPlvrYn: 'N',
+        lessSupFitIntvlPct: 0,
+        lessSupFitQty: 0,
+      }
 
       const isExistSurface = canvas.getObjects().find((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE && obj.parentId === roof.id)
+      const normalizedTrestleDetail = trestleDetail
+        ? { ...defaultTrestleDetail, ...trestleDetail }
+        : isExistSurface?.trestleDetail
+          ? { ...defaultTrestleDetail, ...isExistSurface.trestleDetail }
+          : defaultTrestleDetail
 
       if (isExistSurface) {
+        isExistSurface.set({ trestleDetail: normalizedTrestleDetail })
         if (canvasSetting.roofSizeSet != '3') {
           //북면이 있지만
           if (roof.directionText && roof.directionText.indexOf('北') > -1) {
@@ -424,7 +441,7 @@ export function useModuleBasicSetting(tabNum) {
           originY: 'center',
           modules: [],
           roofMaterial: roof.roofMaterial,
-          trestleDetail: trestleDetail,
+          trestleDetail: normalizedTrestleDetail,
           isNorth: isNorth,
           perPixelTargetFind: true,
           isSaleStoreNorthFlg: moduleSelectionData.common.saleStoreNorthFlg == '1' ? true : false, //북면설치가능점 여부
@@ -2105,7 +2122,7 @@ export function useModuleBasicSetting(tabNum) {
     }
 
     //흐름 방향이 남쪽(아래)
-    const downFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
+    const downFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
       let setupModule = []
 
       const trestleDetailData = moduleSetupSurface.trestleDetail
@@ -2184,6 +2201,11 @@ export function useModuleBasicSetting(tabNum) {
         calcAreaHeight = isNaN(calcAreaHeight) ? moduleSetupSurface.height : calcAreaHeight
         let calcModuleHeightCount = calcAreaHeight / (height + intvVer)
 
+        // 대칭 지붕을 위해 south의 calcAreaWidth 저장 (north에서 참조)
+        if (symmetricWidthRef && moduleIndex === 0) {
+          symmetricWidthRef.south = calcAreaWidth
+        }
+
         if (type === MODULE_SETUP_TYPE.LAYOUT) {
           calcModuleWidthCount = layoutCol > calcModuleWidthCount ? calcModuleWidthCount : layoutCol
           calcModuleHeightCount = layoutRow
@@ -2287,7 +2309,7 @@ export function useModuleBasicSetting(tabNum) {
       }
     }
 
-    const topFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
+    const topFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
       let setupModule = []
 
       const trestleDetailData = moduleSetupSurface.trestleDetail
@@ -2366,9 +2388,22 @@ export function useModuleBasicSetting(tabNum) {
         //육지붕이 아닐때만 넣는다 육지붕일땐 클릭 이벤트에 별도로 넣어놓음
         const moduleArray = []
 
-        let calcAreaWidth = flowLines.right.x1 - flowLines.left.x1 //오른쪽 x에서 왼쪽 x를 뺀 가운데를 찾는 로직
+        // 북쪽: 남쪽과 동일한 방식으로 계산 (대칭을 위해)
+        let calcAreaWidth = Math.abs(flowLines.right.x1 - flowLines.left.x1) //오른쪽 x에서 왼쪽 x를 뺀 가운데를 찾는 로직
+
+        // 대칭 지붕: south의 calcAreaWidth가 있고 north의 값이 south보다 10% 이상 작으면 south 값 사용
+        if (symmetricWidthRef?.south && calcAreaWidth < symmetricWidthRef.south * 0.9) {
+          // flowLines 좌표도 보정 (중심점 유지하면서 너비 확장)
+          const center = (flowLines.right.x1 + flowLines.left.x1) / 2
+          const halfWidth = symmetricWidthRef.south / 2
+          flowLines.left.x1 = center - halfWidth
+          flowLines.right.x1 = center + halfWidth
+
+          calcAreaWidth = symmetricWidthRef.south
+        }
+
         let calcModuleWidthCount = calcAreaWidth / (width + intvHor) //뺀 공간에서 모듈을 몇개를 넣을수 있는지 확인하는 로직
-        let calcAreaHeight = flowLines.bottom.y1 - flowLines.top.y1
+        let calcAreaHeight = Math.abs(flowLines.bottom.y1 - flowLines.top.y1)
         let calcModuleHeightCount = calcAreaHeight / (height + intvVer)
 
         //단수지정 자동이면
@@ -2469,7 +2504,7 @@ export function useModuleBasicSetting(tabNum) {
 
     //남, 북과 같은 로직으로 적용하려면 좌우는 열 -> 행 으로 그려야함
     //변수명은 bottom 기준으로 작성하여 동일한 방향으로 진행한다
-    const leftFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
+    const leftFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
       let setupModule = []
 
       const trestleDetailData = moduleSetupSurface.trestleDetail //가대 상세 데이터
@@ -2557,6 +2592,11 @@ export function useModuleBasicSetting(tabNum) {
         let calcAreaHeight = Math.abs(flowLines.right.x1 - flowLines.left.x1)
         let calcModuleHeightCount = calcAreaHeight / (width + intvVer)
 
+        // 대칭 지붕을 위해 west의 calcAreaWidth 저장 (east에서 참조)
+        if (symmetricWidthRef && moduleIndex === 0) {
+          symmetricWidthRef.west = calcAreaWidth
+        }
+
         //단수지정 자동이면
         if (type === MODULE_SETUP_TYPE.LAYOUT) {
           calcModuleWidthCount = layoutCol > calcModuleWidthCount ? calcModuleWidthCount : layoutCol
@@ -2655,7 +2695,7 @@ export function useModuleBasicSetting(tabNum) {
       }
     }
 
-    const rightFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
+    const rightFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
       let setupModule = []
 
       const trestleDetailData = moduleSetupSurface.trestleDetail //가대 상세 데이터
@@ -2736,9 +2776,22 @@ export function useModuleBasicSetting(tabNum) {
         //육지붕이 아닐때만 넣는다 육지붕일땐 클릭 이벤트에 별도로 넣어놓음
         const moduleArray = []
 
-        let calcAreaWidth = flowLines.bottom.y1 - flowLines.top.y1 //아래에서 y에서 위를 y를 뺀 가운데를 찾는 로직
+        // 동쪽: 서쪽과 동일한 방식으로 계산 (대칭을 위해)
+        let calcAreaWidth = Math.abs(flowLines.bottom.y1 - flowLines.top.y1) //아래에서 y에서 위를 y를 뺀 가운데를 찾는 로직
+
+        // 대칭 지붕: west의 calcAreaWidth가 있고 east의 값이 west보다 10% 이상 작으면 west 값 사용
+        if (symmetricWidthRef?.west && calcAreaWidth < symmetricWidthRef.west * 0.9) {
+          // flowLines 좌표도 보정 (중심점 유지하면서 높이 확장)
+          const center = (flowLines.bottom.y1 + flowLines.top.y1) / 2
+          const halfHeight = symmetricWidthRef.west / 2
+          flowLines.top.y1 = center - halfHeight
+          flowLines.bottom.y1 = center + halfHeight
+
+          calcAreaWidth = symmetricWidthRef.west
+        }
+
         let calcModuleWidthCount = calcAreaWidth / (height + intvHor) //뺀 공간에서 모듈을 몇개를 넣을수 있는지 확인하는 로직
-        let calcAreaHeight = flowLines.right.x1 - flowLines.left.x1
+        let calcAreaHeight = Math.abs(flowLines.right.x1 - flowLines.left.x1)
         let calcModuleHeightCount = calcAreaHeight / (width + intvVer)
 
         //단수지정 자동이면
@@ -2748,15 +2801,14 @@ export function useModuleBasicSetting(tabNum) {
         }
 
         let calcMaxModuleWidthCount = calcModuleWidthCount > moduleMaxCols ? moduleMaxCols : calcModuleWidthCount //최대 모듈 단수가 있기 때문에 최대 단수보다 카운트가 크면 최대 단수로 씀씀
-        // let totalModuleWidthCount = isChidori ? Math.abs(calcMaxModuleWidthCount) : Math.floor(calcMaxModuleWidthCount) //치조배치일경우는 한개 더 넣는다
+        let totalModuleWidthCount = Math.floor(calcMaxModuleWidthCount)
-        let totalModuleWidthCount = Math.floor(calcMaxModuleWidthCount) //치조배치일경우는 한개 더 넣는다
 
         let calcStartPoint = flowLines.top.type === 'flat' ? (calcAreaWidth - totalModuleWidthCount * height) / 2 : 0 //반씩 나눠서 중앙에 맞춤 left 높이 기준으로 양변이 직선일때만 가운데 정렬
-        let startPointX = flowLines.bottom.y2 - calcStartPoint //시작점을 만든다
+        let startPointX = flowLines.bottom.y1 - calcStartPoint //시작점을 만든다
 
         //근데 양변이 곡선이면 중앙에 맞추기 위해 아래와 위의 길이를 재서 모듈의 길이를 나눠서 들어갈수 있는 갯수가 동일하면 가운데로 정렬 시킨다
         if (flowLines.top.type === 'curve' && flowLines.bottom.type === 'curve') {
-          startPointX = flowLines.bottom.y2 - (calcAreaWidth - totalModuleWidthCount * height) / 2
+          startPointX = flowLines.bottom.y1 - (calcAreaWidth - totalModuleWidthCount * height) / 2
         }
 
         let heightMargin = 0
@@ -2843,7 +2895,18 @@ export function useModuleBasicSetting(tabNum) {
       }
     }
 
-    moduleSetupSurfaces.forEach((moduleSetupSurface, index) => {
+    // 대칭 지붕을 위한 calcAreaWidth 공유 객체 (south→north, west→east)
+    const symmetricWidthRef = { south: null, west: null }
+
+    // 대칭 보정을 위해 south/west가 north/east보다 먼저 처리되도록 정렬
+    const directionOrder = { south: 0, west: 1, north: 2, east: 3 }
+    const sortedModuleSetupSurfaces = [...moduleSetupSurfaces].sort((a, b) => {
+      const orderA = directionOrder[a.direction] ?? 4
+      const orderB = directionOrder[b.direction] ?? 4
+      return orderA - orderB
+    })
+
+    sortedModuleSetupSurfaces.forEach((moduleSetupSurface, index) => {
       moduleSetupSurface.fire('mousedown')
       const moduleSetupArray = []
 
@@ -2869,30 +2932,30 @@ export function useModuleBasicSetting(tabNum) {
       if (setupLocation === 'eaves') {
         // 흐름방향이 남쪽일때
         if (moduleSetupSurface.direction === 'south') {
-          downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
         if (moduleSetupSurface.direction === 'west') {
-          leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
         if (moduleSetupSurface.direction === 'east') {
-          rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
         if (moduleSetupSurface.direction === 'north') {
-          topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
       } else if (setupLocation === 'ridge') {
         //용마루
         if (moduleSetupSurface.direction === 'south') {
-          topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
         if (moduleSetupSurface.direction === 'west') {
-          rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
         if (moduleSetupSurface.direction === 'east') {
-          leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
         if (moduleSetupSurface.direction === 'north') {
-          downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
+          downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
         }
       }
 
@@ -3072,13 +3135,26 @@ export function useModuleBasicSetting(tabNum) {
           type: 'flat',
         }
       } else {
-        rtnObj = {
+        // NaN 체크: offset이 너무 커서 꼭짓점을 넘어가면 NaN 발생
-          target: index === 0 ? 'bottom' : 'top',
+        if (isNaN(pointX1) || isNaN(pointX2) || isNaN(pointY1) || isNaN(pointY2)) {
-          x1: pointX1,
+          // NaN이면 꼭짓점 좌표 사용 (모듈 설치 영역 없음)
-          y1: pointY1,
+          rtnObj = {
-          x2: pointX2,
+            target: index === 0 ? 'bottom' : 'top',
-          y2: pointY2,
+            x1: center.x1,
-          type: 'curve',
+            y1: center.y1,
+            x2: center.x1,
+            y2: center.y1,
+            type: 'curve',
+          }
+        } else {
+          rtnObj = {
+            target: index === 0 ? 'bottom' : 'top',
+            x1: pointX1,
+            y1: pointY1,
+            x2: pointX2,
+            y2: pointY2,
+            type: 'curve',
+          }
         }
       }
 
@@ -3204,13 +3280,26 @@ export function useModuleBasicSetting(tabNum) {
           type: 'flat',
         }
       } else {
-        rtnObj = {
+        // NaN 체크: offset이 너무 커서 꼭짓점을 넘어가면 NaN 발생
-          target: index === 0 ? 'left' : 'right',
+        if (isNaN(pointX1) || isNaN(pointX2) || isNaN(pointY1) || isNaN(pointY2)) {
-          x1: pointX1,
+          // NaN이면 꼭짓점 좌표 사용 (모듈 설치 영역 없음)
-          y1: pointY1,
+          rtnObj = {
-          x2: pointX2,
+            target: index === 0 ? 'left' : 'right',
-          y2: pointY2,
+            x1: center.x1,
-          type: 'curve',
+            y1: center.y1,
+            x2: center.x1,
+            y2: center.y1,
+            type: 'curve',
+          }
+        } else {
+          rtnObj = {
+            target: index === 0 ? 'left' : 'right',
+            x1: pointX1,
+            y1: pointY1,
+            x2: pointX2,
+            y2: pointY2,
+            type: 'curve',
+          }
         }
       }
       rtnObjArray.push(rtnObj)
@@ -4101,6 +4190,7 @@ export function useModuleBasicSetting(tabNum) {
       left: leftRightFlowLine(moduleSetupSurface, length).find((obj) => obj.target === 'left'),
       right: leftRightFlowLine(moduleSetupSurface, length).find((obj) => obj.target === 'right'),
     }
+
     return flowLines
   }
 

src/hooks/module/useTrestle.js

@@ -65,6 +65,10 @@ export const useTrestle = () => {
         if (+roofSizeSet === 3) {
           return
         }
+        const trestleDetail = surface.trestleDetail
+        if (!trestleDetail) {
+          return
+        }
         const construction = moduleSelectionData?.roofConstructions?.find((construction) => construction.roofIndex === roofMaterialIndex).construction
         if (!construction) {
           return
@@ -76,8 +80,8 @@ export const useTrestle = () => {
         let isSnowGuard = construction.setupSnowCover
         let cvrLmtRow = construction.cvrLmtRow
         const direction = parent.direction
-        const rack = surface.trestleDetail.rack
+        const rack = trestleDetail.rack
-        let { rackQty, rackIntvlPct, rackYn, cvrPlvrYn, lessSupFitIntvlPct, lessSupFitQty } = surface.trestleDetail
+        let { rackQty, rackIntvlPct, rackYn, cvrPlvrYn, lessSupFitIntvlPct, lessSupFitQty } = trestleDetail
 
         if (!rack && lessSupFitIntvlPct === 0 && lessSupFitQty === 0) {
           //25/02/06 가대없음의 경우 랙정보가 없음

src/hooks/object/useObjectBatch.js

@@ -152,11 +152,17 @@ export function useObjectBatch({ isHidden, setIsHidden }) {
 
           rect.set({ width: Math.abs(width), height: Math.abs(height) })
 
+          // 마우스를 왼쪽으로 드래그한 경우 left를 현재 포인터 위치로 설정
           if (width < 0) {
-            rect.set({ left: Math.abs(pointer.x) })
+            rect.set({ left: pointer.x })
+          } else {
+            rect.set({ left: origX })
           }
+          // 마우스를 위쪽으로 드래그한 경우 top을 현재 포인터 위치로 설정
           if (height < 0) {
-            rect.set({ top: Math.abs(pointer.y) })
+            rect.set({ top: pointer.y })
+          } else {
+            rect.set({ top: origY })
           }
 
           canvas?.renderAll()
@@ -179,7 +185,8 @@ export function useObjectBatch({ isHidden, setIsHidden }) {
             }
           }
 
-          if (!isCrossChecked) {
+          // 그림자(SHADOW)는 중복 설치 허용, 개구(OPENING)만 중복 체크
+          if (!isCrossChecked && buttonAct === 1) {
             const preObjects = canvas?.getObjects().filter((obj) => obj.name === BATCH_TYPE.OPENING || obj.name === BATCH_TYPE.SHADOW)
             const preObjectsArray = preObjects.map((obj) => rectToPolygon(obj))
             const isCross = preObjectsArray.some((object) => turf.booleanOverlap(pointsToTurfPolygon(object), rectPolygon))
@@ -266,7 +273,8 @@ export function useObjectBatch({ isHidden, setIsHidden }) {
             }
           }
 
-          if (!isCrossChecked) {
+          // 그림자(SHADOW)는 중복 설치 허용, 개구(OPENING)만 중복 체크
+          if (!isCrossChecked && buttonAct === 1) {
             const preObjects = canvas?.getObjects().filter((obj) => obj.name === BATCH_TYPE.OPENING || obj.name === BATCH_TYPE.SHADOW)
             const preObjectsArray = preObjects.map((obj) => rectToPolygon(obj))
             const isCross = preObjectsArray.some((object) => turf.booleanOverlap(pointsToTurfPolygon(object), rectPolygon))

src/hooks/useContextMenu.js

@@ -159,10 +159,6 @@ export function useContextMenu() {
           }
           break
         case 'roof':
-        case 'auxiliaryLine':
-        case 'hip':
-        case 'ridge':
-        case 'eaveHelpLine':
           if (selectedMenu === 'surface') {
             setContextMenu([
               [
@@ -249,6 +245,73 @@ export function useContextMenu() {
                   },
                 },
               ],
+            ])
+          }
+
+          break
+        case 'auxiliaryLine':
+        case 'hip':
+        case 'ridge':
+        case 'eaveHelpLine':
+          if (selectedMenu === 'surface') {
+            setContextMenu([
+              [
+                {
+                  id: 'sizeEdit',
+                  name: getMessage('contextmenu.size.edit'),
+                  component: <SizeSetting id={popupId} target={currentObject} />,
+                },
+                {
+                  id: 'rotate',
+                  name: `${getMessage('contextmenu.rotate')}`,
+                  fn: () => rotateSurfaceShapeBatch(),
+                },
+                {
+                  id: 'roofMaterialRemove',
+                  shortcut: ['d', 'D'],
+                  name: `${getMessage('contextmenu.remove')}(D)`,
+                  fn: () => deleteObject(),
+                },
+                {
+                  id: 'roofMaterialMove',
+                  shortcut: ['m', 'M'],
+                  name: `${getMessage('contextmenu.move')}(M)`,
+                  fn: () => moveSurfaceShapeBatch(),
+                },
+                {
+                  id: 'roofMaterialCopy',
+                  shortcut: ['c', 'C'],
+                  name: `${getMessage('contextmenu.copy')}(C)`,
+                  fn: () => copyObject(),
+                },
+              ],
+              [
+                {
+                  id: 'roofMaterialEdit',
+                  name: getMessage('contextmenu.roof.material.edit'),
+                  component: <ContextRoofAllocationSetting id={popupId} />,
+                },
+                {
+                  id: 'linePropertyEdit',
+                  name: getMessage('contextmenu.line.property.edit'),
+                  fn: () => {
+                    if (+canvasSetting.roofSizeSet === 3) {
+                      swalFire({ text: getMessage('contextmenu.line.property.edit.roof.size.3') })
+                    } else {
+                      addPopup(popupId, 1, <PlacementSurfaceLineProperty id={popupId} roof={currentObject} />)
+                    }
+                  },
+                  // component: <LinePropertySetting id={popupId} target={currentObject} />,
+                },
+                {
+                  id: 'flowDirectionEdit',
+                  name: getMessage('contextmenu.flow.direction.edit'),
+                  component: <FlowDirectionSetting id={popupId} target={currentObject} />,
+                },
+              ],
+            ])
+          } else if (selectedMenu === 'outline') {
+            setContextMenu([
               [
                 {
                   id: 'sizeEdit',