수동으로 방위설정 안되던 버그 수정

Reviewed-on: #21

src/components/estimate/Estimate.jsx

@@ -717,7 +717,7 @@ export default function Estimate({}) {
   /* 케이블 select 변경시  */
   const onChangeDisplayCableItem = (value, itemList) => {
     itemList.map((item, index) => {
-      if (item.dispCableFlg === '1') {
+      if (item.dispCableFlg === '1' && item.itemTpCd !== 'M12') {
         if (value !== '') {
           onChangeDisplayItem(value, item.dispOrder, index, true)
         }
@@ -1146,7 +1146,7 @@ export default function Estimate({}) {
               dispCableFlgCnt++
             }
 
-            if (item.dispCableFlg === '1') {
+            if (item.dispCableFlg === '1' && item.itemTpCd !== 'M12') {
               setCableItem(item.itemId)
             }
           }
@@ -1968,13 +1968,13 @@ export default function Estimate({}) {
                                       getOptionValue={(x) => x.clRefChr1}
                                       components={{
                                         SingleValue: ({ children, ...props }) => {
-                                          return <components.SingleValue {...props}>{props.data.clRefChr3}</components.SingleValue>
+                                          return <components.SingleValue {...props}>{(item.itemTpCd === 'M12')? item.itemName : props.data.clRefChr3}</components.SingleValue>
                                         },
                                       }}
                                       isClearable={false}
                                       isDisabled={true}
                                       value={cableItemList.filter(function (option) {
-                                        return option.clRefChr1 === item.itemId
+                                        return (item.itemTpCd === 'M12')? item.itemId : option.clRefChr1 === item.itemId
                                       })}
                                     />
                                   )}

src/components/floor-plan/modal/basic/BasicSetting.jsx

@@ -186,15 +186,7 @@ export default function BasicSetting({ id, pos = { x: 50, y: 230 } }) {
         //   return
         // }
         trestleRef.current.isComplete().then((res) => {
-          if (!res) {
-            Swal.fire({
-              title: getMessage('construction.length.difference'),
-              icon: 'warning',
-            })
-            return
-          } else {
-            // setTabNum(tabNum + 1)
-          }
+          if (!res) return
         })
         //물건정보 갱신일 수정
       } else {

src/components/floor-plan/modal/basic/step/Orientation.jsx

@@ -125,7 +125,7 @@ export const Orientation = forwardRef((props, ref) => {
       setVerticalSnowCover(inputVerticalSnowCover)
       setSelectedSurfaceType(inputRoughness)
       setStandardWindSpeed(inputStandardWindSpeed)
-      nextStep()
+      nextStep(inputCompasDeg)
       setManagementState({
         ...managementState,
         installHeight: inputInstallHeight,
@@ -175,15 +175,15 @@ export const Orientation = forwardRef((props, ref) => {
       return
     }
     if (e === '0-') {
-      setCompasDeg('-0')
+      setInputCompasDeg('-0')
       return
     }
     if (Number(e) >= -180 && Number(e) <= 180) {
       if (numberCheck(Number(e))) {
-        setCompasDeg(Number(e))
+        setInputCompasDeg(Number(e))
       }
     } else {
-      setCompasDeg(compasDeg)
+      setInputCompasDeg(compasDeg)
     }
   }
 

src/components/floor-plan/modal/basic/step/Trestle.jsx

@@ -8,6 +8,7 @@ import { roofsState } from '@/store/roofAtom'
 import { moduleSelectionDataState, selectedModuleState } from '@/store/selectedModuleOptions'
 import { forwardRef, useContext, useEffect, useImperativeHandle, useRef, useState } from 'react'
 import { useRecoilState, useRecoilValue } from 'recoil'
+import Swal from 'sweetalert2'
 
 const Trestle = forwardRef((props, ref) => {
   const { tabNum, setTabNum, trestleTrigger, roofs, setRoofs, moduleSelectionData, setModuleSelectionData, setRoofsStore } = props
@@ -303,30 +304,122 @@ const Trestle = forwardRef((props, ref) => {
     })
 
     let result = true
-    newAddedRoofs.forEach((roof) => {
-      if (!roof?.eavesMargin || !roof?.ridgeMargin || !roof?.kerabaMargin) result = false
-      if (!roof.trestle?.trestleMkrCd) result = false
-      if (!roof.trestle?.constMthdCd) result = false
-      if (!roof.trestle?.roofBaseCd) result = false
-      if (!roof.construction?.constTp) result = false
+    console.log(newAddedRoofs)
+    for (let i = 0; i < newAddedRoofs.length; i++) {
+      const roof = newAddedRoofs[i]
+
+      if (!roof.trestle?.trestleMkrCd) {
+        Swal.fire({
+          title: getMessage('modal.module.basic.settting.module.error1', [roof.nameJp]), // 가대메이커를 선택해주세요.
+          icon: 'warning',
+        })
+        result = false
+        return false
+      }
+
+      if (!roof.trestle?.constMthdCd) {
+        Swal.fire({
+          title: getMessage('modal.module.basic.settting.module.error2', [roof.nameJp]), // 공법을 선택해주세요.
+          icon: 'warning',
+        })
+        result = false
+        return false
+      }
+      if (!roof.trestle?.roofBaseCd) {
+        Swal.fire({
+          title: getMessage('modal.module.basic.settting.module.error3', [roof.nameJp]), // 지붕밑바탕탕을 선택해주세요.
+          icon: 'warning',
+        })
+        result = false
+        return false
+      }
+      if (!roof.construction?.constTp) {
+        Swal.fire({
+          title: getMessage('modal.module.basic.settting.module.error4', [roof.nameJp]), // 시공법법을 선택해주세요.
+          icon: 'warning',
+        })
+        result = false
+        return false
+      }
 
       if (roof.lenAuth === 'C') {
-        if (!roof.trestle?.length) result = false
+        if (!roof.trestle?.length) {
+          Swal.fire({
+            title: getMessage('modal.module.basic.settting.module.error5', [roof.nameJp]), // L 값을 입력해주세요.
+            icon: 'warning',
+          })
+          result = false
+          return false
+        }
       }
       if (['C', 'R'].includes(roof.raftAuth)) {
-        if (!roof?.raftBaseCd) result = false
+        if (!roof?.raftBaseCd) {
+          Swal.fire({
+            title: getMessage('modal.module.basic.settting.module.error6', [roof.nameJp]), // 서까래 간격을 입력해주세요.
+            icon: 'warning',
+          })
+          result = false
+          return false
+        }
       }
 
       if (['C', 'R'].includes(roof.roofPchAuth)) {
-        if (!roof?.roofPchBase) result = false
+        if (!roof?.roofPchBase) {
+          Swal.fire({
+            title: getMessage('modal.module.basic.settting.module.error7', [roof.nameJp]), // 하제비치를 입력해주세요.
+            icon: 'warning',
+          })
+          result = false
+          return false
+        }
       }
-    })
 
-    const newRoofs = newAddedRoofs.map((roof) => {
-      const { addRoof, construction, trestle, trestleDetail, roofConstructions, ...rest } = roof
-      return rest
-    })
+      if (!roof?.eavesMargin || !roof?.ridgeMargin || !roof?.kerabaMargin) {
+        Swal.fire({
+          title: getMessage('modal.module.basic.settting.module.error8', [roof.nameJp]), // 모듈 배치 영영 값을 입력해주세요.
+          icon: 'warning',
+        })
+        result = false
+        return false
+      }
+
+      if (roof.trestle.trestleMkrCd !== 'NO_DATA') {
+        // 가매 없음이 아닐때는 가대 정보보다 작을 수 없음
+        if (roof.trestleDetail?.eaveIntvl > roof.eavesMargin) {
+          Swal.fire({
+            title: getMessage('modal.module.basic.settting.module.error9', [roof.trestleDetail?.eaveIntvl, roof.nameJp]), // 모듈 배치 영역은 {0}mm 이상이어야 합니다.
+            icon: 'warning',
+          })
+          result = false
+          return false
+        }
+
+        if (roof.trestleDetail?.ridgeIntvl > roof.ridgeMargin) {
+          Swal.fire({
+            title: getMessage('modal.module.basic.settting.module.error10', [roof.trestleDetail?.ridgeIntvl, roof.nameJp]), // 모듈 배치 영역은 {0}mm 이상이어야 합니다.
+            icon: 'warning',
+          })
+          result = false
+          return false
+        }
+
+        if (roof.trestleDetail?.kerabaIntvl > roof.kerabaMargin) {
+          Swal.fire({
+            title: getMessage('modal.module.basic.settting.module.error11', [roof.trestleDetail?.kerabaIntvl, roof.nameJp]), // 모듈 배치 영역은 {0}mm 이상이어야 합니다.
+            icon: 'warning',
+          })
+          result = false
+          return false
+        }
+      }
+    }
+
     if (result) {
+      const newRoofs = newAddedRoofs.map((roof) => {
+        const { addRoof, construction, trestle, trestleDetail, roofConstructions, ...rest } = roof
+        return rest
+      })
+
       setModuleSelectionData({
         ...moduleSelectionData,
         roofConstructions: newAddedRoofs.map((roof, index) => ({
@@ -369,8 +462,6 @@ const Trestle = forwardRef((props, ref) => {
               // ...constructionList.find((construction) => newAddedRoofs[index].construction.constTp === construction.constTp),
               ...roof.construction,
               roofIndex: roof.index,
-              setupCover: cvrChecked,
-              setupSnowCover: snowGdChecked,
               selectedIndex: roof.index,
             },
             trestleDetail: roof.trestleDetail,
@@ -390,6 +481,8 @@ const Trestle = forwardRef((props, ref) => {
     return false
   }
 
+  const onMarginCheck = (target, data) => {}
+
   useImperativeHandle(ref, () => ({
     isComplete,
   }))
@@ -582,7 +675,7 @@ const Trestle = forwardRef((props, ref) => {
                   className="input-origin block"
                   value={eavesMargin ?? 0}
                   // onChange={(e) => dispatch({ type: 'SET_TRESTLE_DETAIL', roof: { ...trestleState, eavesMargin: e.target.value } })}
-                  onChange={(e) => setEavesMargin(e.target.value)}
+                  onChange={(e) => setEavesMargin(+e.target.value)}
                 />
               </div>
               <span className="thin">mm</span>
@@ -595,7 +688,7 @@ const Trestle = forwardRef((props, ref) => {
                   className="input-origin block"
                   value={ridgeMargin ?? 0}
                   // onChange={(e) => dispatch({ type: 'SET_TRESTLE_DETAIL', roof: { ...trestleState, ridgeMargin: e.target.value } })}
-                  onChange={(e) => setRidgeMargin(e.target.value)}
+                  onChange={(e) => setRidgeMargin(+e.target.value)}
                 />
               </div>
               <span className="thin">mm</span>
@@ -608,7 +701,7 @@ const Trestle = forwardRef((props, ref) => {
                   className="input-origin block"
                   value={kerabaMargin ?? 0}
                   // onChange={(e) => dispatch({ type: 'SET_TRESTLE_DETAIL', roof: { ...trestleState, kerabaMargin: e.target.value } })}
-                  onChange={(e) => setKerabaMargin(e.target.value)}
+                  onChange={(e) => setKerabaMargin(+e.target.value)}
                 />
               </div>
               <span className="thin">mm</span>

src/hooks/floorPlan/estimate/useEstimateController.js

@@ -130,6 +130,7 @@ export const useEstimateController = (planNo, flag) => {
           addFlg: true,
           paDispOrder: null,
           dispCableFlg: '0',
+          itemTpCd: '',
         },
       ],
     })
@@ -321,6 +322,7 @@ export const useEstimateController = (planNo, flag) => {
         }
       })
       if (delCnt === estimateData.itemList.length) {
+        itemFlg = false
         setIsGlobalLoading(false)
         return swalFire({ text: getMessage('estimate.detail.save.requiredItem'), type: 'alert', icon: 'warning' })
       }

src/hooks/module/useModuleBasicSetting.js

@@ -409,7 +409,7 @@ export function useModuleBasicSetting(tabNum) {
 
   useEffect(() => {
     if (canvasSetting.roofSizeSet != '3') {
-      if (isObjectNotEmpty(moduleSelectionData) && moduleSelectionData.common.saleStoreNorthFlg === '1') {
+      if (isObjectNotEmpty(moduleSelectionData) && moduleSelectionData?.common?.saleStoreNorthFlg === '1') {
         setSaleStoreNorthFlg(true)
       }
     }

src/hooks/module/useOrientation.js

@@ -22,8 +22,8 @@ export function useOrientation() {
     })
   }, [])*/
 
-  const nextStep = () => {
-    if (isNaN(compasDeg)) {
+  const nextStep = (compas = compasDeg) => {
+    if (isNaN(compas)) {
       setCompasDeg(0)
     }
     const roofs = canvas.getObjects().filter((obj) => obj.name === POLYGON_TYPE.ROOF)
@@ -36,7 +36,7 @@ export function useOrientation() {
 
     roofs.forEach((roof) => {
       roof.set({
-        moduleCompass: isNaN(compasDeg) ? 0 : compasDeg,
+        moduleCompass: isNaN(compas) ? 0 : compas,
       })
       drawDirectionArrow(roof)
     })

src/hooks/roofcover/useRoofShapeSetting.js

@@ -231,6 +231,21 @@ export function useRoofShapeSetting(id) {
                 pitch: pitchRef.current,
                 onlyOffset: true,
               }
+
+              switch (line.direction) {
+                case 'bottom':
+                  direction = 'east'
+                  break
+                case 'top':
+                  direction = 'west'
+                  break
+                case 'left':
+                  direction = 'south'
+                  break
+                case 'right':
+                  direction = 'north'
+                  break
+              }
             }
           })
         }
@@ -716,6 +731,7 @@ export function useRoofShapeSetting(id) {
           type: LINE_TYPE.WALLLINE.SHED,
           pitch: shedPitchRef.current,
           width: shedWidth / 10,
+          offset: shedWidth / 10,
         }
         selectedLine.attributes = { ...attributes, isFixed: true }
         addPitchText(currentObject)

src/locales/ja.json

@@ -37,7 +37,7 @@
   "modal.roof.shape.setting.ridge": "棟",
   "modal.roof.shape.setting.patten.a": "Aパターン",
   "modal.roof.shape.setting.patten.b": "Bパターン",
-  "modal.roof.shape.setting.side": "別に設定",
+  "modal.roof.shape.setting.side": "個別に設定",
   "plan.menu.roof.cover": "伏せ図入力",
   "plan.menu.roof.cover.outline.drawing": "外壁線を描く",
   "plan.menu.roof.cover.roof.shape.setting": "屋根形状の設定",
@@ -114,6 +114,17 @@
   "modal.module.basic.setting.module.eaves.bar.fitting": "軒カバーの設置",
   "modal.module.basic.setting.module.blind.metal.fitting": "落雪防止金具設置",
   "modal.module.basic.setting.module.select": "モジュール/架台選択",
+  "modal.module.basic.settting.module.error1": "가대메이커를 선택해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error2": "공법를 선택해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error3": "지붕밑바탕을 선택해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error4": "시공법을 선택해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error5": "L 을 입력해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error6": "서까래 간격을 입력해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error7": "하제비치를 입력해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error8": "모듈 배치 영영 값을 입력해주세요.(지붕재: {0})(JA)",
+  "modal.module.basic.settting.module.error9": "처마쪽 값은 {0}mm 이상이어야 합니다.(지붕재: {1})(JA)",
+  "modal.module.basic.settting.module.error10": "용마루쪽 값은 {0}mm 이상이어야 합니다.(지붕재: {1})(JA)",
+  "modal.module.basic.settting.module.error11": "케라바쪽 값은 {0}mm 이상이어야 합니다.(지붕재: {1})(JA)",
   "modal.module.basic.setting.module.placement": "モジュールの配置",
   "modal.module.basic.setting.module.placement.select.fitting.type": "設置形態を選択してください。",
   "modal.module.basic.setting.module.placement.waterfowl.arrangement": "千鳥配置",
@@ -125,8 +136,8 @@
   "modal.module.basic.setting.module.placement.do.not": "しない",
   "modal.module.basic.setting.module.placement.arrangement.standard": "配置基準",
   "modal.module.basic.setting.module.placement.arrangement.standard.center": "中央",
-  "modal.module.basic.setting.module.placement.arrangement.standard.eaves": "軒の側",
-  "modal.module.basic.setting.module.placement.arrangement.standard.ridge": "龍丸側",
+  "modal.module.basic.setting.module.placement.arrangement.standard.eaves": "軒側",
+  "modal.module.basic.setting.module.placement.arrangement.standard.ridge": "棟側",
   "modal.module.basic.setting.module.placement.maximum": "最大配置",
   "modal.module.basic.setting.pitch.module.placement.standard.setting": "配置基準の設定",
   "modal.module.basic.setting.pitch.module.placement.standard.setting.south": "南向きに設置す",
@@ -852,7 +863,7 @@
   "has.not.sleeve": "袖なし",
   "jerkinhead.width": "半切妻幅",
   "jerkinhead.slope": "半切妻傾斜",
-  "shed.width": "片流幅",
+  "shed.width": "片流れの出幅",
   "windage": "片流れ",
   "windage.width": "片流れの出幅",
   "write": "作成",

src/locales/ko.json

@@ -114,6 +114,17 @@
   "modal.module.basic.setting.module.eaves.bar.fitting": "처마커버설치",
   "modal.module.basic.setting.module.blind.metal.fitting": "적설방지금구설치",
   "modal.module.basic.setting.module.select": "모듈/가대 선택",
+  "modal.module.basic.settting.module.error1": "가대메이커를 선택해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error2": "공법를 선택해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error3": "지붕밑바탕을 선택해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error4": "시공법을 선택해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error5": "L 을 입력해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error6": "서까래 간격을 입력해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error7": "하제비치를 입력해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error8": "모듈 배치 영영 값을 입력해주세요.(지붕재: {0})",
+  "modal.module.basic.settting.module.error9": "처마쪽 값은 {0}mm 이상이어야 합니다.(지붕재: {1})",
+  "modal.module.basic.settting.module.error10": "용마루쪽 값은 {0}mm 이상이어야 합니다.(지붕재: {1})",
+  "modal.module.basic.settting.module.error11": "케라바쪽 값은 {0}mm 이상이어야 합니다.(지붕재: {1})",
   "modal.module.basic.setting.module.placement": "모듈 배치",
   "modal.module.basic.setting.module.placement.select.fitting.type": "설치형태를 선택합니다.",
   "modal.module.basic.setting.module.placement.waterfowl.arrangement": "물떼새 배치",
@@ -128,6 +139,7 @@
   "modal.module.basic.setting.module.placement.arrangement.standard.eaves": "처마쪽",
   "modal.module.basic.setting.module.placement.arrangement.standard.ridge": "용마루쪽",
   "modal.module.basic.setting.module.placement.maximum": "최대배치",
+  "modal.module.basic.setting.module.placement.margin.check1": "가대메이커를 선택해주세요.",
   "modal.module.basic.setting.pitch.module.placement.standard.setting": "배치기준 설정",
   "modal.module.basic.setting.pitch.module.placement.standard.setting.south": "남향설치",
   "modal.module.basic.setting.pitch.module.placement.standard.setting.select": "지정한 변을 기준으로 설치",