qcast3/qcast-front
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dev #626

Merged
ysCha merged 10 commits from dev into prd-deploy 2026-02-02 14:30:58 +09:00
Conversation 0 Commits 10 Files Changed 8 +154 -52
8 changed files with 154 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
src/components/floor-plan/modal/basic/step/Trestle.jsx
View File

@ -413,7 +413,7 @@ const Trestle = forwardRef((props, ref) => {
setCvrYn(constructionList[index].cvrYn)
setSnowGdPossYn(constructionList[index].snowGdPossYn)
setCvrChecked(false)
setCvrChecked(true)
setSnowGdChecked(false)
}
}
@ -859,7 +859,7 @@ const Trestle = forwardRef((props, ref) => {
type="checkbox"
id={`ch01`}
disabled={!cvrYn || cvrYn === 'N'}
checked={cvrChecked || true}
checked={cvrChecked ?? false}
// onChange={() => dispatch({ type: 'SET_TRESTLE_DETAIL', roof: { ...trestleState, cvrChecked: !trestleState.cvrChecked } })}
onChange={() => setCvrChecked(!cvrChecked)}
/>

3
src/components/floor-plan/modal/circuitTrestle/CircuitTrestleSetting.jsx
View File

@ -124,6 +124,9 @@ export default function CircuitTrestleSetting({ id }) {
*/
const validateModuleSizeForRack = (surface) => {
const { modules, direction, trestleDetail } = surface
if (!trestleDetail) {
return true // 상세 정보 없음
}
const { rackYn, moduleIntvlHor, moduleIntvlVer } = trestleDetail
if (rackYn === 'N' || !modules || modules.length < 2) {

2
src/components/floor-plan/modal/placementShape/PlacementShapeSetting.jsx
View File

@ -63,7 +63,7 @@ export default function PlacementShapeSetting({ id, pos = { x: 50, y: 180 }, pla
const roofSizeSetArray = [
{ id: 'ra01', name: 'roofSizeSet', value: '1', message: 'modal.placement.initial.setting.size.roof' },
{ id: 'ra02', name: 'roofSizeSet', value: '2', message: 'modal.placement.initial.setting.size.actual' },
// { id: 'ra03', name: 'roofSizeSet', value: '3', message: 'modal.placement.initial.setting.size.none.pitch' },
{ id: 'ra03', name: 'roofSizeSet', value: '3', message: 'modal.placement.initial.setting.size.none.pitch' },
]
/**

17
src/hooks/floorPlan/useImgLoader.js
View File

@ -58,7 +58,12 @@ export function useImgLoader() {
canvas.renderAll()
const formData = new FormData()
const dataUrl = canvas.toDataURL('image/png')
// 고해상도 캡처를 위해 multiplier 옵션 추가 (2배 해상도)
const multiplier = 2
const dataUrl = canvas.toDataURL({
format: 'png',
multiplier: multiplier,
})
const blobBin = atob(dataUrl.split(',')[1])
const array = []
for (let i = 0; i < blobBin.length; i++) {
@ -69,13 +74,13 @@ export function useImgLoader() {
formData.append('objectNo', currentCanvasPlan.objectNo)
formData.append('planNo', currentCanvasPlan.planNo)
formData.append('type', type)
/** 이미지 크롭 좌표 계산 */
/** 이미지 크롭 좌표 계산 (multiplier 배율 적용) */
const positionObj = getImageCoordinates()
console.log('🚀 ~ handleCanvasToPng ~ positionObj:', positionObj)
formData.append('width', Math.round(positionObj[1].x - positionObj[0].x + 100))
formData.append('height', Math.round(positionObj[1].y - positionObj[0].y + 100))
formData.append('left', Math.round(positionObj[0].x))
formData.append('top', Math.round(positionObj[0].y))
formData.append('width', Math.round((positionObj[1].x - positionObj[0].x + 100) * multiplier))
formData.append('height', Math.round((positionObj[1].y - positionObj[0].y + 100) * multiplier))
formData.append('left', Math.round(positionObj[0].x * multiplier))
formData.append('top', Math.round(positionObj[0].y * multiplier))
console.log('🚀 ~ handleCanvasToPng ~ formData:', formData)
/** 이미지 크롭 요청 */

4
src/hooks/module/useModule.js
View File

@ -749,7 +749,7 @@ export function useModule() {
const copyModules = []
const moduleSetupSurface = canvas.getObjects().find((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE && obj.id === activeModule.surfaceId)
let isWarning = false
const { moduleIntvlHor, moduleIntvlVer } = moduleSetupSurface.trestleDetail
const { moduleIntvlHor = 0, moduleIntvlVer = 0 } = moduleSetupSurface.trestleDetail || {}
canvas.discardActiveObject()
targetModules.forEach((module) => {
const { top, left } = getPosotion(module, type, moduleIntvlHor, true)
@ -859,7 +859,7 @@ export function useModule() {
const copyModules = []
const moduleSetupSurface = canvas.getObjects().find((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE && obj.id === activeModule.surfaceId)
let isWarning = false
const { moduleIntvlHor, moduleIntvlVer } = moduleSetupSurface.trestleDetail
const { moduleIntvlHor = 0, moduleIntvlVer = 0 } = moduleSetupSurface.trestleDetail || {}
canvas.discardActiveObject()
targetModules.forEach((module) => {
const { top, left } = getPosotion(module, type, moduleIntvlVer, true)

164
src/hooks/module/useModuleBasicSetting.js
View File

@ -17,7 +17,7 @@ import {
import { calculateVisibleModuleHeight, getDegreeByChon, polygonToTurfPolygon, rectToPolygon, toFixedWithoutRounding } from '@/util/canvas-util'
import '@/util/fabric-extensions' // fabric 객체들에 getCurrentPoints 메서드 추가
import { basicSettingState, roofDisplaySelector } from '@/store/settingAtom'
import offsetPolygon, { calculateAngle, createLinesFromPolygon, cleanSelfIntersectingPolygon } from '@/util/qpolygon-utils'
import offsetPolygon, { calculateAngle, cleanSelfIntersectingPolygon, createLinesFromPolygon } from '@/util/qpolygon-utils'
import { QPolygon } from '@/components/fabric/QPolygon'
import { useEvent } from '@/hooks/useEvent'
import { BATCH_TYPE, LINE_TYPE, MODULE_SETUP_TYPE, POLYGON_TYPE } from '@/common/common'
@ -338,10 +338,27 @@ export function useModuleBasicSetting(tabNum) {
})
let isNorth = false
const defaultTrestleDetail = {
rackYn: 'N',
moduleIntvlHor: +roofSizeSet === 3 ? 300 : 0,
moduleIntvlVer: +roofSizeSet === 3 ? 100 : 0,
rack: null,
rackQty: 0,
rackIntvlPct: 0,
cvrPlvrYn: 'N',
lessSupFitIntvlPct: 0,
lessSupFitQty: 0,
}
const isExistSurface = canvas.getObjects().find((obj) => obj.name === POLYGON_TYPE.MODULE_SETUP_SURFACE && obj.parentId === roof.id)
const normalizedTrestleDetail = trestleDetail
? { ...defaultTrestleDetail, ...trestleDetail }
: isExistSurface?.trestleDetail
? { ...defaultTrestleDetail, ...isExistSurface.trestleDetail }
: defaultTrestleDetail
if (isExistSurface) {
isExistSurface.set({ trestleDetail: normalizedTrestleDetail })
if (canvasSetting.roofSizeSet != '3') {
//북면이 있지만
if (roof.directionText && roof.directionText.indexOf('北') > -1) {
@ -424,7 +441,7 @@ export function useModuleBasicSetting(tabNum) {
originY: 'center',
modules: [],
roofMaterial: roof.roofMaterial,
trestleDetail: trestleDetail,
trestleDetail: normalizedTrestleDetail,
isNorth: isNorth,
perPixelTargetFind: true,
isSaleStoreNorthFlg: moduleSelectionData.common.saleStoreNorthFlg == '1' ? true : false, //북면설치가능점 여부
@ -2105,7 +2122,7 @@ export function useModuleBasicSetting(tabNum) {
}
//흐름 방향이 남쪽(아래)
const downFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
const downFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
let setupModule = []
const trestleDetailData = moduleSetupSurface.trestleDetail
@ -2184,6 +2201,11 @@ export function useModuleBasicSetting(tabNum) {
calcAreaHeight = isNaN(calcAreaHeight) ? moduleSetupSurface.height : calcAreaHeight
let calcModuleHeightCount = calcAreaHeight / (height + intvVer)
// 대칭 지붕을 위해 south의 calcAreaWidth 저장 (north에서 참조)
if (symmetricWidthRef && moduleIndex === 0) {
symmetricWidthRef.south = calcAreaWidth
}
if (type === MODULE_SETUP_TYPE.LAYOUT) {
calcModuleWidthCount = layoutCol > calcModuleWidthCount ? calcModuleWidthCount : layoutCol
calcModuleHeightCount = layoutRow
@ -2287,7 +2309,7 @@ export function useModuleBasicSetting(tabNum) {
}
}
const topFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
const topFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
let setupModule = []
const trestleDetailData = moduleSetupSurface.trestleDetail
@ -2366,9 +2388,22 @@ export function useModuleBasicSetting(tabNum) {
//육지붕이 아닐때만 넣는다 육지붕일땐 클릭 이벤트에 별도로 넣어놓음
const moduleArray = []
let calcAreaWidth = flowLines.right.x1 - flowLines.left.x1 //오른쪽 x에서 왼쪽 x를 뺀 가운데를 찾는 로직
// 북쪽: 남쪽과 동일한 방식으로 계산 (대칭을 위해)
let calcAreaWidth = Math.abs(flowLines.right.x1 - flowLines.left.x1) //오른쪽 x에서 왼쪽 x를 뺀 가운데를 찾는 로직
// 대칭 지붕: south의 calcAreaWidth가 있고 north의 값이 south보다 10% 이상 작으면 south 값 사용
if (symmetricWidthRef?.south && calcAreaWidth < symmetricWidthRef.south * 0.9) {
// flowLines 좌표도 보정 (중심점 유지하면서 너비 확장)
const center = (flowLines.right.x1 + flowLines.left.x1) / 2
const halfWidth = symmetricWidthRef.south / 2
flowLines.left.x1 = center - halfWidth
flowLines.right.x1 = center + halfWidth
calcAreaWidth = symmetricWidthRef.south
}
let calcModuleWidthCount = calcAreaWidth / (width + intvHor) //뺀 공간에서 모듈을 몇개를 넣을수 있는지 확인하는 로직
let calcAreaHeight = flowLines.bottom.y1 - flowLines.top.y1
let calcAreaHeight = Math.abs(flowLines.bottom.y1 - flowLines.top.y1)
let calcModuleHeightCount = calcAreaHeight / (height + intvVer)
//단수지정 자동이면
@ -2469,7 +2504,7 @@ export function useModuleBasicSetting(tabNum) {
//남, 북과 같은 로직으로 적용하려면 좌우는 열 -> 행 으로 그려야함
//변수명은 bottom 기준으로 작성하여 동일한 방향으로 진행한다
const leftFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
const leftFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
let setupModule = []
const trestleDetailData = moduleSetupSurface.trestleDetail //가대 상세 데이터
@ -2557,6 +2592,11 @@ export function useModuleBasicSetting(tabNum) {
let calcAreaHeight = Math.abs(flowLines.right.x1 - flowLines.left.x1)
let calcModuleHeightCount = calcAreaHeight / (width + intvVer)
// 대칭 지붕을 위해 west의 calcAreaWidth 저장 (east에서 참조)
if (symmetricWidthRef && moduleIndex === 0) {
symmetricWidthRef.west = calcAreaWidth
}
//단수지정 자동이면
if (type === MODULE_SETUP_TYPE.LAYOUT) {
calcModuleWidthCount = layoutCol > calcModuleWidthCount ? calcModuleWidthCount : layoutCol
@ -2655,7 +2695,7 @@ export function useModuleBasicSetting(tabNum) {
}
}
const rightFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer) => {
const rightFlowSetupModule = (maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef) => {
let setupModule = []
const trestleDetailData = moduleSetupSurface.trestleDetail //가대 상세 데이터
@ -2736,9 +2776,22 @@ export function useModuleBasicSetting(tabNum) {
//육지붕이 아닐때만 넣는다 육지붕일땐 클릭 이벤트에 별도로 넣어놓음
const moduleArray = []
let calcAreaWidth = flowLines.bottom.y1 - flowLines.top.y1 //아래에서 y에서 위를 y를 뺀 가운데를 찾는 로직
// 동쪽: 서쪽과 동일한 방식으로 계산 (대칭을 위해)
let calcAreaWidth = Math.abs(flowLines.bottom.y1 - flowLines.top.y1) //아래에서 y에서 위를 y를 뺀 가운데를 찾는 로직
// 대칭 지붕: west의 calcAreaWidth가 있고 east의 값이 west보다 10% 이상 작으면 west 값 사용
if (symmetricWidthRef?.west && calcAreaWidth < symmetricWidthRef.west * 0.9) {
// flowLines 좌표도 보정 (중심점 유지하면서 높이 확장)
const center = (flowLines.bottom.y1 + flowLines.top.y1) / 2
const halfHeight = symmetricWidthRef.west / 2
flowLines.top.y1 = center - halfHeight
flowLines.bottom.y1 = center + halfHeight
calcAreaWidth = symmetricWidthRef.west
}
let calcModuleWidthCount = calcAreaWidth / (height + intvHor) //뺀 공간에서 모듈을 몇개를 넣을수 있는지 확인하는 로직
let calcAreaHeight = flowLines.right.x1 - flowLines.left.x1
let calcAreaHeight = Math.abs(flowLines.right.x1 - flowLines.left.x1)
let calcModuleHeightCount = calcAreaHeight / (width + intvVer)
//단수지정 자동이면
@ -2748,15 +2801,14 @@ export function useModuleBasicSetting(tabNum) {
}
let calcMaxModuleWidthCount = calcModuleWidthCount > moduleMaxCols ? moduleMaxCols : calcModuleWidthCount //최대 모듈 단수가 있기 때문에 최대 단수보다 카운트가 크면 최대 단수로 씀씀
// let totalModuleWidthCount = isChidori ? Math.abs(calcMaxModuleWidthCount) : Math.floor(calcMaxModuleWidthCount) //치조배치일경우는 한개 더 넣는다
let totalModuleWidthCount = Math.floor(calcMaxModuleWidthCount) //치조배치일경우는 한개 더 넣는다
let totalModuleWidthCount = Math.floor(calcMaxModuleWidthCount)
let calcStartPoint = flowLines.top.type === 'flat' ? (calcAreaWidth - totalModuleWidthCount * height) / 2 : 0 //반씩 나눠서 중앙에 맞춤 left 높이 기준으로 양변이 직선일때만 가운데 정렬
let startPointX = flowLines.bottom.y2 - calcStartPoint //시작점을 만든다
let startPointX = flowLines.bottom.y1 - calcStartPoint //시작점을 만든다
//근데 양변이 곡선이면 중앙에 맞추기 위해 아래와 위의 길이를 재서 모듈의 길이를 나눠서 들어갈수 있는 갯수가 동일하면 가운데로 정렬 시킨다
if (flowLines.top.type === 'curve' && flowLines.bottom.type === 'curve') {
startPointX = flowLines.bottom.y2 - (calcAreaWidth - totalModuleWidthCount * height) / 2
startPointX = flowLines.bottom.y1 - (calcAreaWidth - totalModuleWidthCount * height) / 2
}
let heightMargin = 0
@ -2843,7 +2895,18 @@ export function useModuleBasicSetting(tabNum) {
}
}
moduleSetupSurfaces.forEach((moduleSetupSurface, index) => {
// 대칭 지붕을 위한 calcAreaWidth 공유 객체 (south→north, west→east)
const symmetricWidthRef = { south: null, west: null }
// 대칭 보정을 위해 south/west가 north/east보다 먼저 처리되도록 정렬
const directionOrder = { south: 0, west: 1, north: 2, east: 3 }
const sortedModuleSetupSurfaces = [...moduleSetupSurfaces].sort((a, b) => {
const orderA = directionOrder[a.direction] ?? 4
const orderB = directionOrder[b.direction] ?? 4
return orderA - orderB
})
sortedModuleSetupSurfaces.forEach((moduleSetupSurface, index) => {
moduleSetupSurface.fire('mousedown')
const moduleSetupArray = []
@ -2869,30 +2932,30 @@ export function useModuleBasicSetting(tabNum) {
if (setupLocation === 'eaves') {
// 흐름방향이 남쪽일때
if (moduleSetupSurface.direction === 'south') {
downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
if (moduleSetupSurface.direction === 'west') {
leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
if (moduleSetupSurface.direction === 'east') {
rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
if (moduleSetupSurface.direction === 'north') {
topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
} else if (setupLocation === 'ridge') {
//용마루
if (moduleSetupSurface.direction === 'south') {
topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
topFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
if (moduleSetupSurface.direction === 'west') {
rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
rightFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
if (moduleSetupSurface.direction === 'east') {
leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
leftFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
if (moduleSetupSurface.direction === 'north') {
downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer)
downFlowSetupModule(maxLengthLine, moduleSetupArray, moduleSetupSurface, containsBatchObjects, intvHor, intvVer, symmetricWidthRef)
}
}
@ -3072,13 +3135,26 @@ export function useModuleBasicSetting(tabNum) {
type: 'flat',
}
} else {
rtnObj = {
target: index === 0 ? 'bottom' : 'top',
x1: pointX1,
y1: pointY1,
x2: pointX2,
y2: pointY2,
type: 'curve',
// NaN 체크: offset이 너무 커서 꼭짓점을 넘어가면 NaN 발생
if (isNaN(pointX1) || isNaN(pointX2) || isNaN(pointY1) || isNaN(pointY2)) {
// NaN이면 꼭짓점 좌표 사용 (모듈 설치 영역 없음)
rtnObj = {
target: index === 0 ? 'bottom' : 'top',
x1: center.x1,
y1: center.y1,
x2: center.x1,
y2: center.y1,
type: 'curve',
}
} else {
rtnObj = {
target: index === 0 ? 'bottom' : 'top',
x1: pointX1,
y1: pointY1,
x2: pointX2,
y2: pointY2,
type: 'curve',
}
}
}
@ -3204,13 +3280,26 @@ export function useModuleBasicSetting(tabNum) {
type: 'flat',
}
} else {
rtnObj = {
target: index === 0 ? 'left' : 'right',
x1: pointX1,
y1: pointY1,
x2: pointX2,
y2: pointY2,
type: 'curve',
// NaN 체크: offset이 너무 커서 꼭짓점을 넘어가면 NaN 발생
if (isNaN(pointX1) || isNaN(pointX2) || isNaN(pointY1) || isNaN(pointY2)) {
// NaN이면 꼭짓점 좌표 사용 (모듈 설치 영역 없음)
rtnObj = {
target: index === 0 ? 'left' : 'right',
x1: center.x1,
y1: center.y1,
x2: center.x1,
y2: center.y1,
type: 'curve',
}
} else {
rtnObj = {
target: index === 0 ? 'left' : 'right',
x1: pointX1,
y1: pointY1,
x2: pointX2,
y2: pointY2,
type: 'curve',
}
}
}
rtnObjArray.push(rtnObj)
@ -4101,6 +4190,7 @@ export function useModuleBasicSetting(tabNum) {
left: leftRightFlowLine(moduleSetupSurface, length).find((obj) => obj.target === 'left'),
right: leftRightFlowLine(moduleSetupSurface, length).find((obj) => obj.target === 'right'),
}
return flowLines
}

4
src/hooks/module/useModuleTrestle.js
View File

@ -61,7 +61,7 @@ export function useModuleTrestle(props) {
const [lengthBase, setLengthBase] = useState(0)
const [hajebichi, setHajebichi] = useState(0)
const [cvrYn, setCvrYn] = useState('N')
const [cvrChecked, setCvrChecked] = useState(false)
const [cvrChecked, setCvrChecked] = useState(true)
const [snowGdPossYn, setSnowGdPossYn] = useState('N')
const [snowGdChecked, setSnowGdChecked] = useState(false)
const [eavesMargin, setEavesMargin] = useState(0)
@ -88,7 +88,7 @@ export function useModuleTrestle(props) {
setKerabaMargin(selectedRoof?.kerabaMargin ?? 0)
setLengthBase(Math.round(selectedRoof?.length ?? 0))
setCvrYn(selectedRoof?.construction?.cvrYn ?? 'N')
setCvrChecked(selectedRoof?.construction?.cvrChecked ?? false)
setCvrChecked(selectedRoof?.construction?.cvrChecked ?? true)
setSnowGdPossYn(selectedRoof?.construction?.snowGdPossYn ?? 'N')
setSnowGdChecked(selectedRoof?.construction?.snowGdChecked ?? false)
setTrestleDetail(selectedRoof?.trestleDetail)

8
src/hooks/module/useTrestle.js
View File

@ -65,6 +65,10 @@ export const useTrestle = () => {
if (+roofSizeSet === 3) {
return
}
const trestleDetail = surface.trestleDetail
if (!trestleDetail) {
return
}
const construction = moduleSelectionData?.roofConstructions?.find((construction) => construction.roofIndex === roofMaterialIndex).construction
if (!construction) {
return
@ -76,8 +80,8 @@ export const useTrestle = () => {
let isSnowGuard = construction.setupSnowCover
let cvrLmtRow = construction.cvrLmtRow
const direction = parent.direction
const rack = surface.trestleDetail.rack
let { rackQty, rackIntvlPct, rackYn, cvrPlvrYn, lessSupFitIntvlPct, lessSupFitQty } = surface.trestleDetail
const rack = trestleDetail.rack
let { rackQty, rackIntvlPct, rackYn, cvrPlvrYn, lessSupFitIntvlPct, lessSupFitQty } = trestleDetail
if (!rack && lessSupFitIntvlPct === 0 && lessSupFitQty === 0) {
//25/02/06 가대없음의 경우 랙정보가 없음